NH workmaster 25 vs LS XG3025

[LS Tractor Owner]

Tried may different ways to word it on google and couldn't get an answer.. Is the New Holland workmaster 25 made by LS and is it the same as the LS XG3025? They sure look the same. I know the workmaster 25 S is the same as the MT125, the Boomer 24 is the XJ2025.

 

[Tractorable]

I'd say that yes they're the same tractor, but without looking I'm not 100% on that. It seems that many folks on here hedge towards buying direct from LS rather than buying a rebadged LS.

 

[LS Tractor Owner]

I'd say that yes they're the same tractor, but without looking I'm not 100% on that. It seems that many folks on here hedge towards buying direct from LS rather than buying a rebadged LS.

Yes, I currently have as LS. The main concern is any reputable dealer is around 500 miles away. There is a NH dealer about 50 away. Just thinking about if I would have to transport a much larger / heavier tractor that distance. My little SCUT isn't too bad to haul.

 

[CMV]

Look closely at the loaders. I think NH and LS use different manufacturers for them. Probably close enough to each other it isn't relevant, but if one lifted more, went higher, etc, might be a separator...

 

[LS Tractor Owner]

Look closely at the loaders. I think NH and LS use different manufacturers for them. Probably close enough to each other it isn't relevant, but if one lifted more, went higher, etc, might be a separator...

That I will do! Thanks. About the only thing I could find about the rebranding was " built to NH specs" so not sure if the specs are better on either one until I research further. Right now I'm not too impressed w/ the NH dealer.. Hasn't called or emailed back in 2 days...typical of what I found out here.. No competition so they don't care. They know most people won't drive too far or pay large delivery fees.