Gale Hawkins
Super Member
- Joined
- Sep 20, 2009
- Messages
- 8,262
- Location
- Murray, KY
- Tractor
- 1948 Allis Chambers Model B 1976 265 MF / 1983 JD 310B Backhoe / 1966 Ford 3000 Diesel / 1980 3600 Diesel
This has been a hot summer project and summer left yesterday so we got the sleeves back into the block and got the crank finished today and the pistons loaded. Hope to get the head on tomorrow.
At age 3 in 1954 I played on Dad's Model B and started driving it when I was 5 while he was picking corn by hand.
I have no way of knowing what age it was but this 1948 is very similar except it has like a 50 year old Wood's belly mower on it. I bought it non running. It turned out the nearly empty bottle of Liquid Glass stop leak in the tool box had made its way into the crankcase. The bearings were nice and shiny but very thin. I have learned so much about this 19 HP engine over the summer. The machine shop saved the crankshaft and head. I cleaned up the sleeves and pistons and we are reusing them. I had to find a used rocker arm due to the Liquid Glass in the motor oil.
I am looking forward to hear the 70 year old tractor run.
At age 3 in 1954 I played on Dad's Model B and started driving it when I was 5 while he was picking corn by hand.
I have no way of knowing what age it was but this 1948 is very similar except it has like a 50 year old Wood's belly mower on it. I bought it non running. It turned out the nearly empty bottle of Liquid Glass stop leak in the tool box had made its way into the crankcase. The bearings were nice and shiny but very thin. I have learned so much about this 19 HP engine over the summer. The machine shop saved the crankshaft and head. I cleaned up the sleeves and pistons and we are reusing them. I had to find a used rocker arm due to the Liquid Glass in the motor oil.
I am looking forward to hear the 70 year old tractor run.