TODAYS SEAT TIME

[Sawyer Rob]

Hey Daugen,
My dealer said that the 4707 is supposed to be spec'd with the 30 in Trellborg tires,

Those are great tires...

SR

 

[Bigpuddie]

Those are great tires...

SR

Yes they are...

 

[daugen]

my first radials and they sure do look flat...
but I went out and ran a disc in a muddy field and those tires almost did the whole thing in 2wd, only once did I feel myself slowing down. Was curious how much grip those huge rear tires have, and pulling an 8 foot disc through mud is a pretty good test.

 

[sixdogs]

Take a Tour of AGCO's Changzhou Operations - YouTube

The good thing about Agco is they own Fendt and other high line tractors, and lots of corporate knowhow went into designing this
"global" series (a wonderful euphemism for made in China...) and setting a high spec for the tractor. It's only been out three years but so far the reviews have been very positive. I have nothing to compare against, never owned this size tractor before.

A

... That video is my idea of a vacation, some want to go on ocean cruse, some want to go to Hawaii some want skiing, golfing............ me, drop my wife off at the museum and I'll go walk around a tractor factory or anywhere where theres a motor on it.

That is one impressive video and you wouldn't have to invite me twice. Put me in coach. I know it's marketing but you can't fake the content.

 

[sixdogs]

Those are great tires...

SR

I have radials (18.4x30 and 12.x24) on a 90HP Deere and the increase in pulling power is dramatic.

 

[LouNY]

The good radials will pull quite a bit better then a bias ply tire.

Myself I had about 2 hours today after 4 hours yesterday cleaning up after about 16" of snow in -7 Degree plus wind blowing;


then I have to post this showing the temp in the cab with the outside at -7F the wind chill was -15 to -25
it was much nicer in the cab gloves and stocking cap off and jacket unzipped, the only way to roll :cloud9::drink:

 

[lostcreekranch]

The good radials will pull quite a bit better then a bias ply tire.

Myself I had about 2 hours today after 4 hours yesterday cleaning up after about 16" of snow in -7 Degree plus wind blowing;
View attachment 588186 View attachment 588187
View attachment 588188
then I have to post this showing the temp in the cab with the outside at -7F the wind chill was -15 to -25
it was much nicer in the cab gloves and stocking cap off and jacket unzipped, the only way to roll :cloud9::drink:
View attachment 588190

Where did you find your charger / temp. readout?

 

[Slowpoke Slim]

The good radials will pull quite a bit better then a bias ply tire.

Myself I had about 2 hours today after 4 hours yesterday cleaning up after about 16" of snow in -7 Degree plus wind blowing;
View attachment 588186 View attachment 588187
View attachment 588188
then I have to post this showing the temp in the cab with the outside at -7F the wind chill was -15 to -25
it was much nicer in the cab gloves and stocking cap off and jacket unzipped, the only way to roll :cloud9::drink:
View attachment 588190

Yup. GAWD I love my cabbed tractor.

Lol.

 

[Slowpoke Slim]

Finally bothered to take the Edge Tamers off of my FEL bucket tonight. Ground has been frozen hard as stone for a while now, so just don't need them again until things start to thaw.

Pushed a little snow tonight after work, too.

 

[LouNY]

Where did you find your charger / temp. readout?

I don't remember either E bay or amazon,
I would suspect E Bay I prefer it over Amazon for some reason,
I remember having to be carefull as many of them had a Celsius readout,
This one switchesback and forth from voltage to temperature