4800 Volts and a cat

Status
Not open for further replies.
   / 4800 Volts and a cat #32  
Potential difference, ohms law.
 
Last edited:
   / 4800 Volts and a cat #33  
Because it forms the least path of resistance? I confess that I cooked my hotdogs the old fashioned way tonight... in a frying pan.
 
   / 4800 Volts and a cat #34  
One Christmas, we received an electric hot dog cooker. It held 4 wieners between 2 rows of metal spikes. It had NO on/off switch just power cord. It had a clear safety lid, how in the world they were able to sell them in stores is beyond me.
 
   / 4800 Volts and a cat #36  
Because it forms the least path of resistance? I confess that I cooked my hotdogs the old fashioned way tonight... in a frying pan.

Nope, but it does have to do with resistance and voltage drop.
 
   / 4800 Volts and a cat #37  
Potential difference, ohms law.

Yep.. winner, winner chicken dinner. Or in this case hot dog dinner! :)

There is a potential difference of voltage between the legs of the LED where the two legs are inserted a distance apart. The potential difference is small, but the LED doesn't need much voltage to turn it on. Athough it is AC the diode still turns on for half of the time due to the difference in voltage between its legs as the hot dog drops the voltage across its length. A really interesting dynamic situation.
 
   / 4800 Volts and a cat #38  
Speaking of this potential difference along the length of the hot dog, Something similiar happens when a high voltage power line hits the ground. The fuse MAY blow or trip out, BUT it may not. Current will flow through the ground, and as you stand with your feet apart on that ground depending on how good the soles are and how sweaty, how high the voltage on the line, and so forth you may have a lethal potential difference between your feet. An interesting if potentially lethal phenomenon.
 
   / 4800 Volts and a cat #39  
All our lines are 12 or 23kv phase to phase. 7 or 13 to ground.

I would not boom up to a cat in a bucket truck. That could go wrong many ways. Think about someone possibly getting hurt trying to help it. It could touch a phase and become energized while being retrieved. It could go phase to phase or phase to ground as well. All while in close proximity to a worker. Or he could just claw the heck outta the guys face. Working on energized high voltage is dangerous, and none of the equipment moves unpredictably on it's own. You'd have to tranquilize it first.

I wouldn't poke him with an extension stick either, for fear of him landing on me.

.22, climb down the same way he got there, become chinese food by way of electrocution, possibly become hawk food, or rot in place. He's on his own. I bet that's what the utility workers said.

The least risk to life, limb and equipment is to leave it be.
 
   / 4800 Volts and a cat #40  
Speaking of this potential difference along the length of the hot dog, Something similiar happens when a high voltage power line hits the ground. The fuse MAY blow or trip out, BUT it may not. Current will flow through the ground, and as you stand with your feet apart on that ground depending on how good the soles are and how sweaty, how high the voltage on the line, and so forth you may have a lethal potential difference between your feet. An interesting if potentially lethal phenomenon.
They told us to to "bunny hop" away. Feet together.
 
Status
Not open for further replies.

Tractor & Equipment Auctions

MI T M 1400 PSI Electric Pressure Washer (A50325)
MI T M 1400 PSI...
2005 FORD F-650 (A52472)
2005 FORD F-650...
2020 FREIGHTLINER CASCADIA 126 TANDEM AXLE SLEEPER TRUCK (A52141)
2020 FREIGHTLINER...
2007 WABASH 53FT DRY VAN TRAILER (A52576)
2007 WABASH 53FT...
NEW 2024 LOAD TRAIL 83IN X 14FT Tandem Axle Dump Low-pro Trailer (A52748)
NEW 2024 LOAD...
2008 Ford Escape XLT SUV (A51694)
2008 Ford Escape...
 
Top