Official nickname 'The Beast" is home ;-)

   / Official nickname 'The Beast" is home ;-) #1  

shucksters

Gold Member
Joined
Mar 13, 2013
Messages
268
Location
TN
Tractor
Kioti RX6620 TLB with Cab, Kioti DK6010SE, Kubota BX2370 + FEL/60"MMM Kawasaki Mule ProFXT EPS LE
IMG_2728.jpegIMG_2729.jpegIMG_2730.jpegIMG_2731.jpeg

Made it home safe with the RX6620 TLB today....checked it over multiple times, played with the backhoe and the grapple, took them both off and put the bucket on- dealer sent me home with all the filters and fluids for the 50 hour and they did a great job setting it up with a WR Long 3rd function and 3 rear remotes (1 regular, 1 detent, 1 float). TODAY WAS A GOOD DAY :D
 
   / Official nickname 'The Beast" is home ;-)
  • Thread Starter
#2  
IMG_2722.jpegIMG_2726.jpeg

Final preps...they also kept the grill guard to weld some expanded metal on (with matching paint) to protect it when I'm grappling...the bump in power is amazing (from 44hp to 66hp) and the hydraulic shuttle is going to take a little getting used to after having a hydrostat. I've been debating filled tires vs just having some weight on the back so we'll see about that. It seems very well put together based on first impressions. I am happy to be in the "pack" now...also...Happy Easter and thanks for the input and replies. Sam
 
   / Official nickname 'The Beast" is home ;-) #3  
Congrats ! Nice machine!
 
   / Official nickname 'The Beast" is home ;-) #4  
Congratulations. It is a Beast.
I wish Kioti had self leveling buckets on the smaller tractors.
 
   / Official nickname 'The Beast" is home ;-) #5  
Nice looking tractor, enjoy!
 
   / Official nickname 'The Beast" is home ;-) #6  
Very nice. If you do load the rears, just be sure the downriggers can support that additional weight when you have them down and are using the backhoe. I have mine loaded and there were are no issues. It actually stabilizes the tractor more against the backhoe in my opinion.
 
   / Official nickname 'The Beast" is home ;-) #7  
Very nice. If you do load the rears, just be sure the downriggers can support that additional weight when you have them down and are using the backhoe. I have mine loaded and there were are no issues. It actually stabilizes the tractor more against the backhoe in my opinion.

Kinda comparing apples to oranges, I think.

The largest hoe available for the Kioti has an 8.5' digging depth
Your M62 has a 14' digging depth.
Yours is a dedicated TLB.

I would LOVE to have an M62!
 
   / Official nickname 'The Beast" is home ;-) #8  
Kinda comparing apples to oranges, I think.

The largest hoe available for the Kioti has an 8.5' digging depth
Your M62 has a 14' digging depth.
Yours is a dedicated TLB.

I would LOVE to have an M62!

It actually isnt dedicated. I can take the backhoe off in about 10 min. That said my BH weights 2190 lbs no bucket. I am sure it is heavier than a 8.5 ft version, but the recommendation to check downrigger strength is still valid in my opinion.
 
   / Official nickname 'The Beast" is home ;-) #9  
That's a fine looking machine. I have a 7320 with 450 hours on it. We absolutely love it. Works like a dream.
 
   / Official nickname 'The Beast" is home ;-)
  • Thread Starter
#10  
That's a fine looking machine. I have a 7320 with 450 hours on it. We absolutely love it. Works like a dream.

Thank you sir! That's good to hear about your 7320...
 

Tractor & Equipment Auctions

2018 FREIGHTLINER CASCADIA TANDEM AXLE SLEEPER (A51222)
2018 FREIGHTLINER...
2007 Case IH 2588 4WD Combine (A50657)
2007 Case IH 2588...
30ft Pole S/A Towable Trailer (A49346)
30ft Pole S/A...
2024 TOFT 1550 Hydraulic Breaker (A50860)
2024 TOFT 1550...
(INOP) VOLVO L110H WHEEL LOADER (A50459)
(INOP) VOLVO L110H...
CATALOG IS A GUIDE ONLY!! (A50774)
CATALOG IS A GUIDE...
 
Top