New garage and home build

   / New garage and home build
  • Thread Starter
#101  
I started this thread to mostly show the garage build but the house is nearly done and the garage limps along waiting for the trusses.

476FE790-D66D-44C8-BD5F-5BF8D5B69C49.jpeg8B2F5363-4ADA-4330-860D-8F557A6DB6AD.jpegFB2553BD-4274-465A-97B0-A6F708A13B5D.jpeg
 
   / New garage and home build #102  
:thumbsup:
Very nice Pix!
The shop will be finished before you know it without all the interior "mechanicals" and finishes of a house.
 
   / New garage and home build #105  
Looks great! Any cool stuff for the garage portion? Heated or nice workshop section? Or more to just cram in all the toys and cars? I haven't looked through all 10 pages, so sorry if you already mentioned that.

I just moved into a house we build this last winter/spring and know what you are going through. Looks like it came out great though! Do you have your CO and moved in?
 
   / New garage and home build
  • Thread Starter
#106  
Looks great! Any cool stuff for the garage portion? Heated or nice workshop section? Or more to just cram in all the toys and cars? I haven't looked through all 10 pages, so sorry if you already mentioned that.

I just moved into a house we build this last winter/spring and know what you are going through. Looks like it came out great though! Do you have your CO and moved in?

Thanks b4, we do have the CO and will move Monday after closing today.
I’ve run lp to the garage and likely will put in a module heater. It will store the motor home, truck, tractor and implements, snowmobile trailer and a workshop that will probably end up being to small. Lol
 
   / New garage and home build #109  
Thanks b4, we do have the CO and will move Monday after closing today.
I’ve run lp to the garage and likely will put in a module heater. It will store the motor home, truck, tractor and implements, snowmobile trailer and a workshop that will probably end up being to small. Lol

Sounds perfect! Good luck with the move!
 
   / New garage and home build
  • Thread Starter
#110  
Very nice. Looks like something you'd see in a magazine!!!

Thanks guys. I’m surprised at Eddie for not asking why the crown molding is missing on the pantry unit left of the fridge. ;)

The panel on the left of the fridge wasn’t finished correctly so we had to order a replacement and they’ll finish it when that panel arrives.
 

Tractor & Equipment Auctions

2018 HINO 258 S/A SERVICE TRUCK (A51243)
2018 HINO 258 S/A...
UNUSED AGT SKID STEER QUICK ATTACH SEEDERDRILL (A51244)
UNUSED AGT SKID...
5' X 20' 3/8" THICK STEEL PLATE (3) PIECES (A51244)
5' X 20' 3/8"...
10 x 18 Transfer Auger (A50515)
10 x 18 Transfer...
Wolverine Mini Skid Steer Combination Bucket (A50514)
Wolverine Mini...
400 bu Gravity Wagon (A50514)
400 bu Gravity...
 
Top