Sawyer Rob
Super Member
I rotary cut, then I rotary cut some more!
I'm glad to get it done, now I can move onto the next job!
SR
I'm glad to get it done, now I can move onto the next job!
SR
What did you do at work today?
- Thread starter Shaneard
- Start date
- Views: 63290
Industrial Toys
Super Star Member
- Joined
- Feb 25, 2008
- Messages
- 16,742
- Location
- Ontario Canada
- Tractor
- Kubota R510 Wheel Loader + Cab and backhoe, JD 6200 Open Station, Cushman 6150, 4x4, ten foot 56 hp Kubota diesel hydraulic wing mower, Steiner 430 Diesel Max, Kawasaki Diesel Mule, JD 4x2 Electric Gator
Called a precast place. Was surprised on two counts. One thses steps only cost $640 CDN + 13% tax, AND they weigh 1600 LBS! More than I figured.
So for 50 bucks in diesel and a days work, I guess it's all right. Not exactly the great win fall, I thought. If I had broken something or got an overweight fine, that would have been bad. I can only have 500 pounds in that trailer to be legal. I bet my gear and the railings weighed that.
So for 50 bucks in diesel and a days work, I guess it's all right. Not exactly the great win fall, I thought. If I had broken something or got an overweight fine, that would have been bad. I can only have 500 pounds in that trailer to be legal. I bet my gear and the railings weighed that.
Sawyer Rob
Super Member
My job today was to mow grass, and I "Grasshoppered" a lot of grass today...
I also, repowered my sawmill, so I had a pretty full day.
SR
I also, repowered my sawmill, so I had a pretty full day.
SR
bridge4
Platinum Member
We run an event venue and have a room for couples to stay after getting married.
Alarm went off at 4:30 am for carbon monoxide. Had to run over and placate them/deal with FD and get things settled. Turns out our batteries for our fire suppression system are gassing off when charging and letting out a whole lot. Going to get some sealed batteries so this doesn't happen again. Volunteer guys don't need their weekends filled with 4 am calls that in my mind shouldn't be happening.
Alarm went off at 4:30 am for carbon monoxide. Had to run over and placate them/deal with FD and get things settled. Turns out our batteries for our fire suppression system are gassing off when charging and letting out a whole lot. Going to get some sealed batteries so this doesn't happen again. Volunteer guys don't need their weekends filled with 4 am calls that in my mind shouldn't be happening.
Industrial Toys
Super Star Member
- Joined
- Feb 25, 2008
- Messages
- 16,742
- Location
- Ontario Canada
- Tractor
- Kubota R510 Wheel Loader + Cab and backhoe, JD 6200 Open Station, Cushman 6150, 4x4, ten foot 56 hp Kubota diesel hydraulic wing mower, Steiner 430 Diesel Max, Kawasaki Diesel Mule, JD 4x2 Electric Gator
You sure it wasn't burning rubber?
herm0016
Platinum Member
ha.
yesterday i worked from home. did my clicking away and then ran errands to pick up some 2-4-d, grass seed, fertilizer, dry cleaning, lumber for fixing blown over brand new swing set.
Worked "hard" . but back at the real job this morning and sunday.
Steppenwolfe
Super Member
- Joined
- Apr 11, 2012
- Messages
- 6,374
- Location
- The Blue Ridge Mountains
- Tractor
- Kubota MX5400, 1140 RTV
Yep... those old Internationals were some of the best made. Spent many an hour on a 444 and an "A" we used for cultivating.
hawkeye08
Elite Member
Attended a number of meetings where poor planning was the rule.. presented to a team that supports the distributors a new product they need to know about.
5030
Epic Contributor
- Joined
- Feb 21, 2003
- Messages
- 26,993
- Location
- SE Michigan in the middle of nowhere
- Tractor
- Kubota M9000 HDCC3 M9000 HDC
NOTHING... Been retired for 5 years. Just farm now. Work sucks, big time and my shop basically runs itself.
robbyr
Veteran Member
Made these award stirrups.
