So I have a Frontier FP2206 weighs 995lbs. After running for a couple hours, the 3 point hitch operate very slow, if I run the RPM’s all the way up it lifts but struggles to get to the top. I bough the tractor February this year 2019 and they said they changed all filters and fluids. As anyone else had this issue?
3-Point Hitch John Deere 4410 3 point hitch issues
- Thread starter JT4410
- Start date
- Views: 6155
-
- Tags
- john deere 4410
Kyle_in_Tex
Super Star Member
At first, it sounds like your hydraulic oil is getting hot, like it's going though a barely open valve or something...
Maybe try looking at this
https://www.tractorbynet.com/forums...4310-rockshaft-repair-filter-replacement.html
Maybe try looking at this
https://www.tractorbynet.com/forums...4310-rockshaft-repair-filter-replacement.html
mike48130
Platinum Member
- Joined
- Jan 20, 2011
- Messages
- 591
- Location
- Plymouth, MI
- Tractor
- JD 4410, 4210 Ford 1700, 550, Bobcat 843
How many hours? Do you have a loader? It could be the pump is starting to go and not getting enough pressure. There is also a pressure relief valve. It is possible that is dirty or not adjusted properly.
1099 hours, yes have a loader and have no issues lifting heavy loads at all.
Where is the pressure relief valve located?
mike48130
Platinum Member
- Joined
- Jan 20, 2011
- Messages
- 591
- Location
- Plymouth, MI
- Tractor
- JD 4410, 4210 Ford 1700, 550, Bobcat 843
Kyle_in_Tex
Super Star Member
beenthere
Super Star Member
- Joined
- Aug 16, 2001
- Messages
- 18,553
- Location
- Southern Wisconsin, USA
- Tractor
- JD_4x2_Gator, JD_4300, JD_425, JD_455 AWS, added JD_455, JD_110, JD_X485(sold)
Which shaft are you referring to, that you had to take out?
Kyle_in_Tex
Super Star Member
The one the red lines I drew are pointing to.
