Iseki tu 1500 tiller

[pagary]

I just purchased the previous mentioned tractor, it has the 3cyl diesel engine, has a 3pt hitch. Been looking for a aftermarket tiller, was wondering if the tractor would be able to handle a king kutter 4 foot tiller,almost impossible to find a iseki original tiller

 

[Roadworthy]

At only 15 horsepower I'd be dubious about the tractor and a four foot tiller.

 

[pagary]

I was thinking about the size of the stock tiller that came with the tractor when new. The couple iseki tiller's I have found,have been in rather rough condition

 

[ptsg]

These tractors usually come with a 40" or 47" tiller.

We have loads of these tillers here and it ain't worth much because of their proprietary mount and weird tines. People just buy a 3 pt hitch kit and a regular 3 pt tiller.

The regular L shaped tines will do a better job also.

Now their tine design might that way so it requires less HP to run it, I can't quite confirm this.

Get something that can at least cover the width of the tractor.

 

[pagary]

These tractors usually come with a 40" or 47" tiller.

We have loads of these tillers here and it ain't worth much because of their proprietary mount and weird tines. People just buy a 3 pt hitch kit and a regular 3 pt tiller.

The regular L shaped tines will do a better job also.

Now their tine design might that way so it requires less HP to run it, I can't quite confirm this.

Get something that can at least cover the width of the tractor.

I really appreciate your information, I'm looking at a used Kubota tiller now, I'd like to mount the tiller to the tractor and try it before purchasing, I think the tiller is close to 500 lbs

 

[ptsg]

You might need some front weights with a tiller that heavy.

 

[pagary]

Woods 42-30 tiller

You might need some front weights with a tiller that heavy.

I ended up with a woods 42-30 tiller, everything hooked up to my 3 pt hitch, I just have to shorten the pto shaft a few inches and add some front end weight, seems like its going to work