M7060 Cast wheels at wider setting pics

[radios1]

dualies are another option, wider and more traction!.

 

[5030]

Never seen a Kubby with duals. Guess there is always a first time but saying that, the axles themselves aren't long enough.

 

[oosik]

HUH!!! My owners manual say to never run duals..........

 

[radios1]

HUH!!! My owners manual say to never run duals..........

I just found out that Kubota's have notoriously small axles, and they break with duals, the wheels have to slip a bit on them..

 

[radios1]

Never seen a Kubby with duals. Guess there is always a first time but saying that, the axles themselves aren't long enough.

there's many pictures of them running duals, it don't have anything to do with axle length, they mount with the bulging side to each other, just like on an 18 wheeler.. but don't do it, the axles are too weak compared to other make tractors..

 

[oosik]

Maybe on smaller Kubotas. The rear axles on my 2009 Kubota M6040 - 4" diameter.

 

[5030]

there's many pictures of them running duals, it don't have anything to do with axle length, they mount with the bulging side to each other, just like on an 18 wheeler.. but don't do it, the axles are too weak compared to other make tractors..

On a big truck (or on my goose neck as well, the inner rim and the outer rim (duals) mount to the axle, not to each other.

 

[5030]

Maybe on smaller Kubotas. The rear axles on my 2009 Kubota M6040 - 4" diameter.

The mounting flange or the axle itself? There is a difference.

 

[oosik]

Like I said - the rear axle is 4". The flange is 10".

 

[5030]

Like I said - the rear axle is 4". The flange is 10".

Never measured mine but I suppose at least that big. No need to, never had an issue in 4000 hours.