TnAndy
Veteran Member
- Joined
- Aug 9, 2013
- Messages
- 1,993
- Location
- East Tennessee
- Tractor
- Yanmar LX410...IHI 35J excavator Woodmizer LT40
DJ......how about some more detailed photos of that homemade planter ? Looks very interesting !
2020 gardens
- Thread starter Sonny580
- Start date
- Views: 25666
DJ......how about some more detailed photos of that homemade planter ? Looks very interesting !
EddieWalker
Epic Contributor
Had some rain and thought this was a nice picture of the raised beds while it was raining.
DJ54
Elite Member
- Joined
- Jan 20, 2009
- Messages
- 4,579
- Location
- Carroll, Ohio
- Tractor
- IH Farmall 656 gas/ IH 240 Utility/ 2, Super C Farmalls/ 2, Farmall A's/ Farmall BN/McCormick-Deering OS-6/McCormick-Deering O-4/ '36 Farmall F-12/ 480 Case hoe. '65 Ford 2000 3 cyl., 4 spd. w/3 spd Aux. Trans
It's pretty crude actually. I took one of the spare David Bradley chassis I had, added the engine, (It's a Tecumseh 5 hp with electric start..!!) hydraulic pump, oil tank, hydraulic valve, and other misc. parts for the power unit. I did add a flow control valve for the hydraulic oil, as I wasn't just sure how fast it would move. It will make just a tad bit of difference, and mostly speed up travel when tramming backand forth to the barn where I keep it.
The hydraulic valve for the splitter is set in the detente/return position, for oil flow to the hydraulic drive motor. I also utilized the OEM DB clutch, so as to pause to drop a plant. The one video showing setting plants non-stop, but I've always put a tsp. of Epsom Salts under each tomato plant, to help prevent blossom end rot. This was the first year I used it, and was more concerned with setting plants. Hence the stopping for a few seconds to add the epsom salts, drop the plant, then move forward the 24" -30" spacing. To simplify adding the epsom salts, I got a hand squeeze sugar dispenser off Amazon. It has several different pieces you put in it to dispense a certain amount of "whatever". It just happened to have the piece that will dispence 1, tsp. of what you need. Sure speeds up the process.
In that video, it pretty well shows the framework. Furrow shovel, drop tube, hiller to cover the plant, and packer wheels to tuck them in. The furrow shovel is what is called an irrigation shovel. Got it from I believe Norwest Mfg. They make all sorts of cultivator shovels, sweeps, etc. This works perfect for what I had in mind. 3" PVC for the drop tube, and a 3" to 4" adapter for a funnel top. The hillers are actually a middle buster for a tiller. I took the plasma cutter, and split it down the center. Welded some small angle iron on the back, so as to attach to the shank. Packer wheels are just some spare lawn mower wheels I had laying around. Tabs the wheels are mounted to are bent at a slight angle to pack the dirt inward, and give some spacing back away from the plant. I've found it worksbest to soak the plants well with water, while in the tray. Just the little bit of extra weight at the bottom,makes the plant stand pretty well straight up when you drop it down the tube. Occasionally I need to take my toe, and straighten one up, if a small clod of dirt rolls inwhere the plantwill drop,and make it fall over.
I built the frame, (way over built..!!) and used a set of depth gauge wheels from a bent up set of DB cultivators. Frame was bent, but the depth gauge set up was fine. I did make a larger set of wheels for it, as the OEM DB wheels didn't give enough space below the furrowing ahovel when tramming back & forth like I wanted. These are worn out opener discs for a no-till planter. I made the hub from 1-1/4" round stock, and bored the 3/4" hole through them on the metal lathe. The smaller disc that is welded to the hub, that bolts it to the "wheel were cut with a 4" hole saw on the drill press. And just used the holes that are in the wheels to bolt them on.
No plans were ever drawn up. No fancy computer programs involved. I just had a picture in my mind of what I wanted to build, and this is the result. Sometimes it's good, to have a good imagination, even better if you can build it. The only thing written down was some measurements for this & that, and degreeof angle needed to make the drawbar the same as other DB attachments. I do need to add one more thing at the moment. A tool box to hold several wrenches,pliers, and a hammer to make depth adjustments on the furrow shovel, hillers, and packer wheels. Other than that, I'm happy with the results, and works very well for me.
Sonny has built some cool things too, neat to see what others have made, and utilize. Using a chassis/pieces/parts from something, then transform in to your intended purpose, to make life easier, with all of the ginger bread.
MAH00190 - YouTube
MOV02153 - YouTube
The hydraulic valve for the splitter is set in the detente/return position, for oil flow to the hydraulic drive motor. I also utilized the OEM DB clutch, so as to pause to drop a plant. The one video showing setting plants non-stop, but I've always put a tsp. of Epsom Salts under each tomato plant, to help prevent blossom end rot. This was the first year I used it, and was more concerned with setting plants. Hence the stopping for a few seconds to add the epsom salts, drop the plant, then move forward the 24" -30" spacing. To simplify adding the epsom salts, I got a hand squeeze sugar dispenser off Amazon. It has several different pieces you put in it to dispense a certain amount of "whatever". It just happened to have the piece that will dispence 1, tsp. of what you need. Sure speeds up the process.
In that video, it pretty well shows the framework. Furrow shovel, drop tube, hiller to cover the plant, and packer wheels to tuck them in. The furrow shovel is what is called an irrigation shovel. Got it from I believe Norwest Mfg. They make all sorts of cultivator shovels, sweeps, etc. This works perfect for what I had in mind. 3" PVC for the drop tube, and a 3" to 4" adapter for a funnel top. The hillers are actually a middle buster for a tiller. I took the plasma cutter, and split it down the center. Welded some small angle iron on the back, so as to attach to the shank. Packer wheels are just some spare lawn mower wheels I had laying around. Tabs the wheels are mounted to are bent at a slight angle to pack the dirt inward, and give some spacing back away from the plant. I've found it worksbest to soak the plants well with water, while in the tray. Just the little bit of extra weight at the bottom,makes the plant stand pretty well straight up when you drop it down the tube. Occasionally I need to take my toe, and straighten one up, if a small clod of dirt rolls inwhere the plantwill drop,and make it fall over.
I built the frame, (way over built..!!) and used a set of depth gauge wheels from a bent up set of DB cultivators. Frame was bent, but the depth gauge set up was fine. I did make a larger set of wheels for it, as the OEM DB wheels didn't give enough space below the furrowing ahovel when tramming back & forth like I wanted. These are worn out opener discs for a no-till planter. I made the hub from 1-1/4" round stock, and bored the 3/4" hole through them on the metal lathe. The smaller disc that is welded to the hub, that bolts it to the "wheel were cut with a 4" hole saw on the drill press. And just used the holes that are in the wheels to bolt them on.
No plans were ever drawn up. No fancy computer programs involved. I just had a picture in my mind of what I wanted to build, and this is the result. Sometimes it's good, to have a good imagination, even better if you can build it. The only thing written down was some measurements for this & that, and degreeof angle needed to make the drawbar the same as other DB attachments. I do need to add one more thing at the moment. A tool box to hold several wrenches,pliers, and a hammer to make depth adjustments on the furrow shovel, hillers, and packer wheels. Other than that, I'm happy with the results, and works very well for me.
Sonny has built some cool things too, neat to see what others have made, and utilize. Using a chassis/pieces/parts from something, then transform in to your intended purpose, to make life easier, with all of the ginger bread.
MAH00190 - YouTube
MOV02153 - YouTube
Attachments
TnAndy
Veteran Member
- Joined
- Aug 9, 2013
- Messages
- 1,993
- Location
- East Tennessee
- Tractor
- Yanmar LX410...IHI 35J excavator Woodmizer LT40
DJ,
All those hydraulics to drive the planter ?
All those hydraulics to drive the planter ?
TnAndy
Veteran Member
- Joined
- Aug 9, 2013
- Messages
- 1,993
- Location
- East Tennessee
- Tractor
- Yanmar LX410...IHI 35J excavator Woodmizer LT40
Our 2020 gardens are off to a pretty good start. We had said this winter "not gonna plant as much"....well, like most years, that plan didn't survive....ahahhaaaaaa.
Hoop house is doing great. Early potatoes, beans, peas, carrots, lettuce.
Photos from about mid April: (Plants in pots on cart are now out in the garden)
Row of strawberries beside hoop house drive. Roses below.
Today: Picking berries, roses blooming, couple rows of potatoes in this garden and in the other. Peas/tomatoes on cattle panel trellis
Pumpkins at top row with tomatoes beyond
Picked this morning:
4 gallons of strawberries, bowl of peas, about 1/2 bushel of green beans, few young carrots for salad today, and couple plants of Huckleberry Gold potatoes. Purple skin, yellow inside like Yukon Gold....supposed to be a lower glycemic index (lower about raising blood sugar), more diabetic friendly potato.....our first year raising these.
Hoop house is doing great. Early potatoes, beans, peas, carrots, lettuce.
Photos from about mid April: (Plants in pots on cart are now out in the garden)
Row of strawberries beside hoop house drive. Roses below.
Today: Picking berries, roses blooming, couple rows of potatoes in this garden and in the other. Peas/tomatoes on cattle panel trellis
Pumpkins at top row with tomatoes beyond
Picked this morning:
4 gallons of strawberries, bowl of peas, about 1/2 bushel of green beans, few young carrots for salad today, and couple plants of Huckleberry Gold potatoes. Purple skin, yellow inside like Yukon Gold....supposed to be a lower glycemic index (lower about raising blood sugar), more diabetic friendly potato.....our first year raising these.
TnAndy
Veteran Member
- Joined
- Aug 9, 2013
- Messages
- 1,993
- Location
- East Tennessee
- Tractor
- Yanmar LX410...IHI 35J excavator Woodmizer LT40
Thanks.....lot of years in the making, considering it was all woods when we started.
This Photo is from the early days, 1982-83. Taken from about the same place as the existing garden view, the 'hole' up the hill was the initial clearing for the house site. Woods were THICK.
Deer wars:
5 1/2' fence, couple young dogs, and a .223 as a last resort.....but the first two have worked well for many years. Squirrels are a bigger problem.
One average whitetail deer that didn't get the first two warnings
TnAndy
Veteran Member
- Joined
- Aug 9, 2013
- Messages
- 1,993
- Location
- East Tennessee
- Tractor
- Yanmar LX410...IHI 35J excavator Woodmizer LT40
What are all the yellow buckets about Eddie ?
jonathco
Silver Member
- Joined
- Jul 7, 2012
- Messages
- 227
- Location
- Byron, MI
- Tractor
- 1957 Ford 950, 1942 Farmall A w/ loader, John Deere 110, Sears ST16, John Deere 750, Case 3012
What a transformation TnAndy! Makes me feel a bit better about where I am at in year 3 of my 10 acres. Canned venison is the way to go; tried it with a doe I got last year and I am HOOKED!
TnAndy
Veteran Member
- Joined
- Aug 9, 2013
- Messages
- 1,993
- Location
- East Tennessee
- Tractor
- Yanmar LX410...IHI 35J excavator Woodmizer LT40
Or as I often tell people that visit: "I'm 30'sum years into a 50 year project .....and hopefully, the NEXT guy won't have to do near as much.....
"