agjones
Platinum Member
- Joined
- May 4, 2010
- Messages
- 618
- Location
- Jessup Mill, NC
- Tractor
- Rk55HC, Kubota kx040, power-trac 425d, Bobcat L23, Yanmar 401w, bx1880, IHI 30 and Fiori D40 dumpers, Magnatrac mh5000, Dew-eze ATM72LC Slope Mower, Terramite t6 4wd, DR Power brush mower
Thx MR For clarifying this comment.
When pt first started using a qa plate, patents still covered Bob-tach plate and other proprietary attachment types. These companies finally gave up trying to trap buyers in their platform as competition heated up and cad, plasma & welding technology became much more accessible to small shops and home shops.
Unlike most, pt will sell their attachments w no plate so you can attach your own. Their attachments are less costly than most quality comparables.
I've used dozens of attachments for mini and standard skidsteers from about every major and a lot of minor brands. Dollar for dollar power-trac attachments are the best value imo and for their own machines the best match in weight geometry and applied power.
One thing not many people may realize is that a power trac qa plate fits into the central void of most skidsteer plates meaning the attachment is available to both platforms without any compromise. I have a few implements set up this way and it sure helps when a carrier is not available due to scheduling or downtime to still use the tool on another carrier.
When pt first started using a qa plate, patents still covered Bob-tach plate and other proprietary attachment types. These companies finally gave up trying to trap buyers in their platform as competition heated up and cad, plasma & welding technology became much more accessible to small shops and home shops.
Unlike most, pt will sell their attachments w no plate so you can attach your own. Their attachments are less costly than most quality comparables.
I've used dozens of attachments for mini and standard skidsteers from about every major and a lot of minor brands. Dollar for dollar power-trac attachments are the best value imo and for their own machines the best match in weight geometry and applied power.
One thing not many people may realize is that a power trac qa plate fits into the central void of most skidsteer plates meaning the attachment is available to both platforms without any compromise. I have a few implements set up this way and it sure helps when a carrier is not available due to scheduling or downtime to still use the tool on another carrier.
