Pallet forks

[JDAOWNER]

DO SOME FORKS WORK ON BOTH FEL AND 3 POINT HITCH?

 

[lman]

I got these at a good price. I missed where you are at, but I picked them up at the factory and save a bunch on shipping.

Tomahawk Attachments :: Tomahawk Fork Frame w/Forks

 

[Pontific8]

Ditto on the Titan (Palletforks.com) pallet forks...I highly recommend welding an upper 2' backing (cheap angle iron, ok -- like that I used from the Titan shipping container for their heavy duty Stump Bucket) for safety and utility. I also recommend purchasing a Third wrought iron fork for picking up brush, etc. And, Titan's reasonably priced 5' pallet fork extensions work very well with my 3' forks!! I use the forks (with 5/8" plywood sheet) a LOT for a Handy adjustable work table, etc, and, of course, lifting/unloading items.

 

[PILOON]

Shucks, if U weld, get some 3 inch channel and make a set of clamp ons for lighter duty work.
Most CUTs can't lift more weight than clamp ons could handle anyway.

 

[jwstewar]

But, if you drop the weight of the bucket, you can actually pick up more

 

[stagelines]

I really liked the engineering of the Artillian system. Pricier than most other options, but seem to be very well made and thought out.

They have attachments available that fit onto the pallet fork frame.

I would have gone that route, except a friend is scrapping a 3000# capacity forklift and I am welcome to anything from that machine that I want. I will very likely duplicate the front hoe bucket of the Artillian system.

https://www.artillian.com/

 

[Ford850]

I have a set of Everything Attachments XTreme forks on order. I like the large tall frame for brush etc. Unfortunately EA is a month behind so I have to wait awhile for them.

 

[Xfaxman]

DO SOME FORKS WORK ON BOTH FEL AND 3 POINT HITCH?

Yes: https://www.tractorbynet.com/forums/build-yourself/346668-like-add-3ph-brackets-my.html

https://www.tractorbynet.com/forums/build-yourself/346668-like-add-3ph-brackets-my.html

DUAL PURPOSE FORKS

https://www.tractorbynet.com/forums...ount-plates-ssqa-post5064273.html#post5064273

 

[Ford850]

I have a set of Everything Attachments XTreme forks on order. I like the large tall frame for brush etc. Unfortunately EA is a month behind so I have to wait awhile for them.

Well, I spoke too soon. I just ordered my forks a little over a week ago with an estimated build date of one month. EA just emailed to say my order is shipping today! I'm looking forward to getting these pallet forks and put them to use.

 

[EverythingAttachments]

Well, I spoke too soon. I just ordered my forks a little over a week ago with an estimated build date of one month. EA just emailed to say my order is shipping today! I'm looking forward to getting these pallet forks and put them to use.

That's awesome, man!! Yeah, sometimes orders go out much faster than our estimates. You sir, got lucky!! :drink:
Travis