Loader bucket indicator DL100 loader GC2400

   / bucket indicator DL100 loader GC2400 #1  

Dmacleo

Veteran Member
Joined
Sep 11, 2020
Messages
1,867
Location
Etna, Maine
Tractor
2010 MF GC2400 Owner, 2012 MF1532 User
did a quick search did not find answers, but I did not dig into it much.
anyone know of an indicator for DL100 loader?
 
   / bucket indicator DL100 loader GC2400 #2  
I made my own, but decided that it’s almost as effective to look at the upper flat top on the bucket. I think there is a DIY level indicator here somewhere.
 
   / bucket indicator DL100 loader GC2400
  • Thread Starter
#3  
thought I had seen pics of DIY ones in past could not find them today. will look more.
 
   / bucket indicator DL100 loader GC2400 #4  
thought I had seen pics of DIY ones in past could not find them today. will look more.

I have the ones for my DL 95 posted in several places, concept should work on DL 100.... Might be in the "Customization" portion of forum, was posted a year or two ago....

But....

DSC01707-2.jpg DSC01712-6.jpg
DSC01711-5.jpg DSC01709-4.jpg
DSC01708-3.jpg DSC01705-1.jpg
DSC01715-8.jpg DSC01713-7.jpg
DSC01717-9.jpg

Essentially with this rod and tube design when end of rod is even with end of tube the bucket is "level" (flat on ground) [pic #2 & #6]... And yes I know round peg in square hole.... But square tube was all I had that fit the rod well.... And all was scrap pile parts... Maybe spend $1 on MIG wire and electricity....

Dale
 
Last edited:
   / bucket indicator DL100 loader GC2400 #5  
I have an indicator that is simply a flat bar parallel to the loader base. When it is horizontal the bucket is level at any height.
 
   / bucket indicator DL100 loader GC2400
  • Thread Starter
#6  
I have the ones for my DL 95 posted in several places, concept should work on DL 100.... Might be in the "Customization" portion of forum, was posted a year or two ago....

But....

View attachment 675970 View attachment 675972
View attachment 675973 View attachment 675974
View attachment 675975 View attachment 675976
View attachment 675977 View attachment 675971
View attachment 675978

Essentially with this rod and tube design when end of rod is even with end of tube the bucket is "level" (flat on ground) [pic #2 & #6]... And yes I know round peg in square hole.... But square tube was all I had that fit the rod well.... And all was scrap pile parts... Maybe spend $1 on MIG wire and electricity....

Dale

thank you
 

Tractor & Equipment Auctions

2018 ISUZU FTR 24FT BOX TRUCK (A51222)
2018 ISUZU FTR...
2015 MACK GU713(INOPERABLE) (A50854)
2015 MACK...
Hay Van FL-95 Bale Squeezer - Hydraulic Bale Grab for Round and Square Hay Bales (A51039)
Hay Van FL-95 Bale...
2016 Big Tex 14ft. T/A Hydraulic Dump Trailer (A50322)
2016 Big Tex 14ft...
2018 Dodge Charger Sedan (A50324)
2018 Dodge Charger...
2016 Kia Optima Sedan (A48082)
2016 Kia Optima...
 
Top