Super nice Kubota excavator

   / Super nice Kubota excavator
  • Thread Starter
#31  
I'd be cautious... could be a flood machine...:eek:

True! Some other ignorant jerk could have ruined it by flooding it, or flooding the fuel tank, or a flood from natural causes.
I will check if I decide to take a look
 
   / Super nice Kubota excavator #32  
True! Some other ignorant jerk could have ruined it by flooding it, or flooding the fuel tank, or a flood from natural causes.
Good point.

You have deep pockets just buy it .....
 
   / Super nice Kubota excavator #33  
True! Some other ignorant jerk could have ruined it by flooding it, or flooding the fuel tank, or a flood from natural causes.
Good point.

But......if YOU...... drove over to Allentown, you could check that all out YOURSELF!
 
   / Super nice Kubota excavator #34  
But......if YOU...... drove over to Allentown, you could check that all out YOURSELF!

Fried1765 I will pick you up and we can drive to Hay Dudes house and go see the excavator.... I know where he lives....
 
   / Super nice Kubota excavator
  • Thread Starter
#35  
Fried1765 I will pick you up and we can drive to Hay Dudes house and go see the excavator.... I know where he lives....

Sounds good. Bring cash Horse boy. :D
I’ll show ya around the area.
 
   / Super nice Kubota excavator #36  
   / Super nice Kubota excavator
  • Thread Starter
#37  
You know, but seriously, I wonder how well that thing would run a brush cutter?
I have plenty of digging & ditching work, but there’s good money in brush cutting.
Don’t know pump gpm
 
   / Super nice Kubota excavator #38  
I found its 48hp 12,481 lbs so far......
 
   / Super nice Kubota excavator #39  
From the pictures I've seen, I don't think it has enough flow for a brush mower.

I saw two gear hydraulic pumps in tandem, so the flow must be very limited compared to more recent machines with piston pumps and high flow auxiliary circuits.
 
   / Super nice Kubota excavator
  • Thread Starter
#40  
From the pictures I've seen, I don't think it has enough flow for a brush mower.

I saw two gear hydraulic pumps in tandem, so the flow must be very limited compared to more recent machines with piston pumps and high flow auxiliary circuits.

Thats what I'd like to find out.
 

Tractor & Equipment Auctions

2010 POLARIS RANGER 4X4 4 SEATER UTV (A52576)
2010 POLARIS...
2015 Big Tex 70PI 15ft Pipe Top T/A Utility Trailer (A50322)
2015 Big Tex 70PI...
BW RVB3405 20,000lbs 5th Wheel Hitch Base (A50323)
BW RVB3405...
COOPER LIGHTING CAT. NO. MHEP-22/28-175-MT (A53472)
COOPER LIGHTING...
JOHN DEERE WHP48A LOT NUMBER 107 (A53084)
JOHN DEERE WHP48A...
2020 Kubota SVL 75-2 Skid Steer (A51573)
2020 Kubota SVL...
 
Top