Backhoe Question about actual width of John Deere 110 TLB

[KarlS]

Everyone here is so great about sharing information that I figured I would ask my question here - I am looking at purchasing a John Deere 110 TLB but I know that first I need to have a trailer that will fit it. That's where I get confused. The John Deere specs says that it is 86" wide, but I see photos of owners with their 110 on various trailers like the regular skid steer trailers, and those are only 82-82" wide. Is the John Deere data wrong? How wide is the actual outside of rear tire to outside of rear tire width on the TLB? I don't have one close by or I would measure it myself. I am wanting to make sure that it will fit on a standard 83" skid steer trailer or not? Thanks VERY much in advance.

 

[Peter 315]

Well I guess it will fit , most skid steer trailers are around 78'' My load trail trailers are 82'' inside the fenders,and I fix all different size machines on them...

 

[Peter 315]

I found 72'' bucket and 86'' machine width....

 

[KarlS]

I found 72'' bucket and 86'' machine width....

Thanks - that's what I founds as well, but since I saw ones loaded on skid steer trailers which are smaller in width it made me wonder if maybe the actual width is less than what the spec sheet says?? Not sure, but thanks for the feedback

 

[Peter 315]

Thanks - that's what I founds as well, but since I saw ones loaded on skid steer trailers which are smaller in width it made me wonder if maybe the actual width is less than what the spec sheet says?? Not sure, but thanks for the feedback

I looked for awhile and found pictures of the tractor in dump trailers and on reg equipment trailers so I think it will fit on a 82''/83'' inside width trailer.....

 

[JohnDeereJoey]

I have had my 110 on standard issue equipments trailers many time...no problem.

I think the "86 inch machine width" comes from the width if the machine has the 7 foot box blade that was an option when buying the 110 new.

 

[KarlS]

Thanks!

 

[KarlS]

Ah, that would make sense - thanks

 

[KarlS]

I have had my 110 on standard issue equipments trailers many time...no problem.

I think the "86 inch machine width" comes from the width if the machine has the 7 foot box blade that was an option when buying the 110 new.

Ah, that would make sense - thanks

 

[two_bit_score]

Im pretty sure it will fit. This is a good trailer for the 110 TLB, I believe. Diamond C 19LPX GN trailer 22'.