m7060 engine warning 50% power reduction

[5030]

I found what is probably a black market Kubota Diagmaster code analyzer for 8grand with all cables and latest software and endless license.

If the rail was overpressure, the sensor will have to be renewed. It's a one time thing.

 

[5030]

I found what is probably a black market Kubota Diagmaster code analyzer for 8grand with all cables and latest software and endless license.

If the rail was overpressure, the sensor will have to be renewed. It's a one time thing.

Good grief, all that mumbo-jumbo just to make the pollution police happy. Something satisfyingly simple about a pre 4 engine. Filter, lift pump, injection pump lines and injectors. All mechanically actuated. Only 'electronic' thing on either of my M's is the fuel cut solenoid and OEM is 90 bucks and 2 bolts to replace.

 

[RoyKing]

I listed where you can get free software just buy the usb to link box and a cable adapter for $750 use your win10 laptop. diesellaptops.com

 

[5030]

Don't need either. Don't have a post 4 engine in either of my Kubota M9's.

Just amazed at the apparent mumbo-jumbo of all of it.

 

[rScotty]

I listed where you can get free software just buy the usb to link box and a cable adapter for $750 use your win10 laptop. diesellaptops.com

That's a nice site, and a promising business. Maybe the big corporations won't get to have everything their own way afterall. Personally, I'd like to see a return to more small mechanical business and pride in craftsmanship. The US used to be that way and could again. More small businesses are a good answer to the unemployment problem, too.

Luckily, we don't have to depend on the world to change in order to change our own corner of it. There are still plenty of good old machines available to anyone to fix up and use while the corporations figure out how to build reliable new tractors.
rScotty

 

[ruffdog]

Is the SCV functioning as the fuel shut-off solenoid too?

 

[RoyKing]

probably not the shutdown would be the computer not firing the injectors.

 

[grsthegreat]

i personally hate computerized anything. in servicing generators i am constantly having to power down a controller and reboot system to clear generator issues. gets tiring. i just had to go help my neighbor thats having an issue with his new water heater. its electric and its beeping. the thing is too hot. not shutting off. this thing is 2 weeks old. no matter what we did it kept running. i had to shut off breaker and reboot a WATER HEATER. give me a break. its working ok now, but seriously if it knows its too hot, how come it cant shut itself off. all the old electric units did that, cost less than 1/2 of the new units. new and improved my AS*

 

[5030]

i personally hate computerized anything. in servicing generators i am constantly having to power down a controller and reboot system to clear generator issues. gets tiring. i just had to go help my neighbor thats having an issue with his new water heater. its electric and its beeping. the thing is too hot. not shutting off. this thing is 2 weeks old. no matter what we did it kept running. i had to shut off breaker and reboot a WATER HEATER. give me a break. its working ok now, but seriously if it knows its too hot, how come it cant shut itself off. all the old electric units did that, cost less than 1/2 of the new units. new and improved my AS*

Including my cell phone and the laptop I'm posting on as well.

 

[Hay Dude]

That's a nice site, and a promising business. Maybe the big corporations won't get to have everything their own way afterall. Personally, I'd like to see a return to more small mechanical business and pride in craftsmanship. The US used to be that way and could again. More small businesses are a good answer to the unemployment problem, too.

Luckily, we don't have to depend on the world to change in order to change our own corner of it. There are still plenty of good old machines available to anyone to fix up and use while the corporations figure out how to build reliable new tractors.
rScotty

I agree, but with over 800 businesses closing per day and over 300,000 small businesses closed since February, that’s going to be an uphill battle.