Bx1800 snowblower lift cylinder seized.

[toddbiss]

We had about 34inches of snow today! Plenty of up and down cycles. Still not going all the way up. Will either try a rebuild or bite the bullet and get a new cylinder.

 

[tom39]

Did a quick search for "Hydraulic cylinder repair near Enfield, NH" and quite a few places were identified; Curtis Hydraulic, American Hydraulic Repair and North County Hydraulic Inc were the top 3.
If the cylinder isn't damaged most likely it can be rebuilt. If it were me, I would check a hydraulic shop and see if they can repair the cylinder.

 

[BX23S-1]

Bumped: I`d like to know how this all worked out.

 

[toddbiss]

Will let you know going to get a rebuild kit and try to rebuild it.

Bumped: I`d like to know how this all worked out.

 

[BX23S-1]

Will let you know going to get a rebuild kit and try to rebuild it.

Sounds good, can you post pics of rebuilding it?
I hope you get it all working good again.