massynh

[Massynh]

I have a 2013 33 h p, 1533 massy Ferguson with 500 hours, had a rod come through the block, now I need a E3CD engine, or a block, I live in Mass, and any tips where I could find a used engine or block would be appreciated
Thank you

 

[WranglerX]

I would call around to local dealer(s) and see if they know of local tractor salvage yard or used tractor sale(S), that might have parts you need....

 

[can do]

I have a 2013 33 h p, 1533 massy Ferguson with 500 hours, had a rod come through the block, now I need a E3CD engine, or a block, I live in Mass, and any tips where I could find a used engine or block would be appreciated
Thank you

Hey Massynh ! did You check out the Iseki site here on TBN , Also check under the following tractor manufactures who had the same Iseki engine in them AGCO , Bolens , Challenger , & Iseki. & AGCO did make a tractor for a short period time. IMHO You might have a better chance finding what You need under all these different manufactures that used Iseki power plants.& welcome to TBN.

 

[kenmbz]

Welcome to TBN and I hope someone can help.

 

[MoKelly]

Welcome from Missouri.

MoKelly

 

[Rebeldad1]

have you priced a new one?
may be less stress and faster.
or may be the only answer.

 

[can do]

I have a 2013 33 h p, 1533 massy Ferguson with 500 hours, had a rod come through the block, now I need a E3CD engine, or a block, I live in Mass, and any tips where I could find a used engine or block would be appreciated
Thank you

Hey Massyh ! This is a link I found just looking for a E3CD Iseki engine here You go, Iseki Tractor Parts Usa - Find Iseki Tractor Parts www.justfindinfo.com/Engin/Today .IMHO this is very good place to start as it is a good link to 2 sources & You'll have to do a cross link with Iseki tractors on one site ,I hope this is some help.