ford 4000 clutch release bearing support removal

[Jbrandon]

I removed the 5 bolts holding the bearing support but cannot seem to remove it as it is so far back in the bell housing. Any suggestions on how to remove it would be appreciated.

 

[Gator6x4]

I removed the 5 bolts holding the bearing support but cannot seem to remove it as it is so far back in the bell housing. Any suggestions on how to remove it would be appreciated.

Watch this and see if it is of any help. Removal of the throw out bearing starts at about 12 minutes in.

 

[Jbrandon]

Thanks Gator 6x4 for the reply. I was able to remove it.