Share Pics of People Hauling or Towing Something Wrong

[sixdogs]

i love this internet photo ... not sure if there is anything "wrong" with this method though ... creative solution for sure

View attachment 750741

"A" for effort on that one.

 

[Shutesbury]

At a local "Misfit's Prom" parade in a rural western Massachusetts town...

 

[Thomas]

Not good idea.

 

[buckeyefarmer]

That works, until it doesn’t.

 

[tacticalturnip]

At a local "Misfit's Prom" parade in a rural western Massachusetts town...

An adorable photo, but definitely not a smart means of conveyance.

 

[notaz3]

I was riding in a backhoe bucket before I could walk. Tilted up more, and much higher. May not be OSHA approved; but, was fun.

 

[aczlan]

It looks like the wind bent it and it won't roll up. The support arms are up but not enough. If you don't put them away during wind it bends stuff and the parts don't nest together. It won't roll up if that happens. They should have just removed it.

That would have required having tools and a ladder...

Aaron Z

 

[duramaxsky]

That would have required having tools and a ladder...

Aaron Z

That's why I always carry both.

 

[RjCorazza]

That would have required having tools and a ladder...

Aaron Z

I am paranoid with towing and loads. My previous RV relied solely on the awning' internal coil spring to keep the awning stowed. Screw that. I put a pin through it so it could not unroll.

 

[duramaxsky]

I am paranoid with towing and loads. My previous RV relied solely on the awning' internal coil spring to keep the awning stowed. Screw that. I put a pin through it so it could not unroll.

Mine came with velcro straps to wrap around the arms. The instructions said you don't need them but some people feel better using them. I have never used them and towed mine well over 100k miles. Including states like Utah and Idaho where the speed limit is 80. Never had a problem. Even still has the original fabric. I do keep it inside at home though. I don't know what brand you have but mine is a Carefree and you need to release an lever to unlock the roller to either open or close it.