OP
Raul-02
Veteran Member
- Joined
- Aug 23, 2021
- Messages
- 1,284
- Tractor
- kioti DK4710 SE HST CAB
to be embarrassingly honest, I hadn't thought of that.
Am I nutz?
- Thread starter Raul-02
- Start date
- Views: 9092
4570Man
Super Star Member
- Joined
- Apr 7, 2015
- Messages
- 18,425
- Location
- Crossville, TN
- Tractor
- Kubota M59, Kubota L3800, Grasshopper 428D, Topkick dump truck, 3500 dump truck, 10 ton trailer, more lighter trailers.
I like the rolling the barrel on the ground idea a lot better than the trying to shake it idea. There’s no way you can shake it hard enough to mix anything short of water.
OP
Raul-02
Veteran Member
- Joined
- Aug 23, 2021
- Messages
- 1,284
- Tractor
- kioti DK4710 SE HST CAB
I'm starting to warm to that also
OP
Raul-02
Veteran Member
- Joined
- Aug 23, 2021
- Messages
- 1,284
- Tractor
- kioti DK4710 SE HST CAB
There are minimum thresholds for delivered concrete volume
greenerdreams
Bronze Member
- Joined
- Apr 7, 2009
- Messages
- 62
nice idea but used mixers are cheap and they work easily and quickly. i think your idea may take a while in each load prep
Topzide
Platinum Member
Time is money! Just buy or rent a mixer for the job. Under $300 at Harbor Freight and works decent. Find a unit on FB or CL. If I needed one more then I do, I'd get a 3p pto driven one. No cords, portable and no motor to worry about!
bdhsfz6
Elite Member
- Joined
- Apr 11, 2015
- Messages
- 3,119
- Location
- Northeastern Pennsylvania
- Tractor
- Kubota MX5800 HST & L6060 HSTC Formerly L6060 HST B7100 HST, L2550, L3010 HST, L3430 HST
A couple of years ago, I picked up a used cement mixer at a yard sale for $5. It was in good physical shape but the electric motor was missing. I installed a hydraulic motor, welded a SSQA plate to the legs of the mixer and used the 3rd function valve to power the hydraulic motor. I use the tractor & FEL to mix, transport and dump concrete wherever it's needed.
I like that I no longer have to set up the mixer next to the sand & gravel piles and cement bags. Instead of bringing the ingredients to the mixer, I now take the mixer to the ingredients which are usually stored in different locations.
I like that I no longer have to set up the mixer next to the sand & gravel piles and cement bags. Instead of bringing the ingredients to the mixer, I now take the mixer to the ingredients which are usually stored in different locations.
Smokeydog
Elite Member
Don’t know if the loader drum shake method could adequately mix. Do have a fork lift 55 gallon handler that uses a hand chain drive to rotate the drum.
Enjoyed the 3pt mixers being able to go to piles and truck to charge ingredients. Then carry to place. Could make several yards per day. Wore out several kinds of drum mixers over the years.
Shovel loading is now kind of hard. Always wanted to build a skip pan or hopper and use loader bucket(s) to volumetrically charge the mixer. 1/3yd gas powered or pto mixer. An idea needing to get fleshed out.
Enjoyed the 3pt mixers being able to go to piles and truck to charge ingredients. Then carry to place. Could make several yards per day. Wore out several kinds of drum mixers over the years.
Shovel loading is now kind of hard. Always wanted to build a skip pan or hopper and use loader bucket(s) to volumetrically charge the mixer. 1/3yd gas powered or pto mixer. An idea needing to get fleshed out.
