Istillcare
New member
Mentioning again, probably for the last time. Your initial concept of a small pressure vessel is good but choice of vessel would be vastly improved by using a 2 liter plastic pop bottle, light, durable, safe, free and would last forever at 60 or 70 psi and could be refilled many times to 100 psi and after a couple cycles, unscrew the cap and put a new bottle on in a few seconds.
Scrhader valve or other port of choice would be installed through the cap. Hot glue works great on the cap also.
Scrhader valve or other port of choice would be installed through the cap. Hot glue works great on the cap also.