Loader Compatibility Between Models

[nova3930]

Someone nearby has a Koyker 125 that came off a 2310 Yanmar.

Does anyone know if it uses the same mounts as my 2420 would?

Looking to get the loader and install it to help my yanmar sell. Everyone wants a loader and mine doesn't have one. At the price I can probably get all my $ for it back.

 

[MTGreen]

Suggest you call Koyker as they don't appear to publish loader mount info

 

[Roadworthy]

Try to determine from Yanmar literature the proper factory loader model number for each of those tractors. Kubota may use the same loader for three or four different models. Yanmar may do the same.

 

[nova3930]

Suggest you call Koyker as they don't appear to publish loader mount info

I got a message into them now. Thought I might get something quicker from our resident experts.

 

[winston1]

The 2310 has a 3t84h-s, the 2420 has a 3t84h-na. Just what that suffix difference means is beyond me.

 

[nova3930]

The 2310 has a 3t84h-s, the 2420 has a 3t84h-na. Just what that suffix difference means is beyond me.

Whatever it means there's a lot of part overlap between the tractors according to the Fredrick's website.

 

[bmaverick]

Someone nearby has a Koyker 125 that came off a 2310 Yanmar.

Does anyone know if it uses the same mounts as my 2420 would?

Looking to get the loader and install it to help my yanmar sell. Everyone wants a loader and mine doesn't have one. At the price I can probably get all my $ for it back.

Just look at the YM fame size between the two. Should they be the same, it's a done deal to get it.

The attached is the OE Yanma loaders for the Gray Market machines. Should those fit the same machine, then the Koyer would fit too.

Compliments of the Yanmar Tractor Owners Group.

main groups.io Group

*Yanmar Tractor Owners Group.* **US models, Gray market models, Cub Cadet models, RK models, even our green siblings known as Deere's. ** *A valuable source for owners of Yanmar tractors.* * * *If you would like to join our group, then click on the +Join This Group button below left. *NOTE: A...

yanmar-tractor-owners.groups.io

We have all of this data on the site for FREE in the manuals and Resource Page section. Over 35+ years of community member donations. We are the oldest and largest group on the web.

 

[nova3930]

Much appreciated

 

[bmaverick]

Much appreciated

As you are in North AL, is your YM2310 a UTDA Fredricks machine? Mine is.

 

[nova3930]

Wish I could read Japanese though. Gonna take a minute to figure that out lol

 

[nova3930]

As you are in North AL, is your YM2310 a UTDA Fredricks machine? Mine is.

I am in N. AL. Fredrick's is due east of me about 2 miles.

Mine is a 2420 and is a Fredrick's machine. The 2310 I don't know.

 

[bmaverick]

Wish I could read Japanese though. Gonna take a minute to figure that out lol

We all read Japanese here. What's too hard to understand??? LOL

Hint, we all use Yandex OCR.

Yandex

Finds everything

translate.yandex.com

Take screen snap-shot of area in the manual and just paste it in the image translator.

Likewise, you can take a snapshot with a camera or camera phone and put it into Yandex OCR and read all the decals on the machine.

We've been doing this now for the past 10 years.

This should make you an expert in Japanese. LOL

 

[bmaverick]

I am in N. AL. Fredrick's is due east of me about 2 miles.

Mine is a 2420 and is a Fredrick's machine. The 2310 I don't know.

I was once in Nashville. Now way up north. I'm still over a 2 hour drive to the MN Fredricks dealer up here.

All you got to do is look at the hood for the Fredricks UTDA s/n plate. It's special because with it it's a fully approved Yanmar Co. import and refurb in the U.S.A. and Canada. No other company has ever been given this legal right. Thus, should anyone ever sell, they can so on eBay, FB Market place, etc without any Yanmar legal action should it take place.

Now, CList is considered less monitored and the Gray refurbs from others are mostly done there. Yanmar has taken action many times on the well know sites. Thus the refurbs no longer have Yanmar logos or decals. New decals show YNM YM2310 for example. Engine plate remains the same and untouched. This is the loop hole for Gray Market machines entering the U.S.A.

BTW, even the Chechen manual Karl did can be translated to English.

 

[nova3930]

I was once in Nashville. Now way up north. I'm still over a 2 hour drive to the MN Fredricks dealer up here.

All you got to do is look at the hood for the Fredricks UTDA s/n plate. It's special because with it it's a fully approved Yanmar Co. import and refurb in the U.S.A. and Canada. No other company has ever been given this legal right. Thus, should anyone ever sell, they can so on eBay, FB Market place, etc without any Yanmar legal action should it take place.

Now, CList is considered less monitored and the Gray refurbs from others are mostly done there. Yanmar has taken action many times on the well know sites. Thus the refurbs no longer have Yanmar logos or decals. New decals show YNM YM2310 for example. Engine plate remains the same and untouched. This is the loop hole for Gray Market machines entering the U.S.A.

BTW, even the Chechen manual Karl did can be translated to English.

Yeah when I bought mine Tom Fredricks was in that day so I got the run down from him. Nice fella.

 

[nova3930]

We all read Japanese here. What's too hard to understand??? LOL

Hint, we all use Yandex OCR.

Yandex

Finds everything

translate.yandex.com

Take screen snap-shot of area in the manual and just paste it in the image translator.

Likewise, you can take a snapshot with a camera or camera phone and put it into Yandex OCR and read all the decals on the machine.

We've been doing this now for the past 10 years.

This should make you an expert in Japanese. LOL

I can magically read japanese now

 

[nova3930]

I would say the loaders are a direct fit between the 2310 and the 2420 given the factory loaders. Included some comparison shots for future reference should this topic come up again.

The overall factory kit between the two tractors has a different part number but that appears to be due to plumbing differences for the hydraulics. The various structural assemblies have the same part numbers between the two. Again you don't start seeing different part numbers till you get into the hydraulic plumbing assemblies. To me that makes sense given that they're mechanically 2 different series of tractors.

ETA

Realizing now my comparison screen grabs aren't the best. Anyway, you get the picture. If I get a chance I may redo these at a higher resolution..

 

[bmaverick]

I would say the loaders are a direct fit between the 2310 and the 2420 given the factory loaders. Included some comparison shots for future reference should this topic come up again.

The overall factory kit between the two tractors has a different part number but that appears to be due to plumbing differences for the hydraulics. The various structural assemblies have the same part numbers between the two. Again you don't start seeing different part numbers till you get into the hydraulic plumbing assemblies. To me that makes sense given that they're mechanically 2 different series of tractors.

ETA

Realizing now my comparison screen grabs aren't the best. Anyway, you get the picture. If I get a chance I may redo these at a higher resolution..

So mechanically for mounting the loaders between the two models, the same parts are used. This is a huge plus in your favor as the Koyer loader would have it's own hose and pipe routing.

Looks like it's a GO to grab that loader now.

 

[nova3930]

So mechanically for mounting the loaders between the two models, the same parts are used. This is a huge plus in your favor as the Koyer loader would have it's own hose and pipe routing.

Looks like it's a GO to grab that loader now.

You got it.

 

[nova3930]

Took a while to get it all put together but most definitely works. Now who wants to buy a little yanmar lol

 

[kenmac]

This is the one I say on market place the other day. Have you sold it ?