Good morning!!!!

[Thomas]

Well morning all;
I spent my morning puttering around outside these weather guessers have quite the variance in their guesses.
I've seen 2-6", 4-8" and 8-12" with the 8-12 being bandied about quite often.
So I stuck my oil tank to see how that was doing as I haven't been using the coal this winter and my wife has been working
from home so the house is being keep warmer then it used to be. Got 19" left in a 48" 1000 gallon tank. So about 360 gallons left
out of the about 900 that it got filed to so used about 2/3's of that tank so far. I'll likely move the portable 300 over and transfer it if the
yard ever get froze good.
Then prepped the Branson for the worst forecast so we should get the least amount now.
Back blade and bucket off;
View attachment 786617

Blower and front blade on;
View attachment 786619

Now to read this forum then go visit with one of my brothers for a bit.
Everyone stay safe and enjoy

Looks like old man winter BIG surprise.

 

[Popgadget]

Can you get another of those oil caps, KJC? If so, you might consider destroying the cap to remove it so as not to mess up the filler neck on the oil reservoir.

This would be a good plan, you could take a good look at the new cap, and possibly figure out what could be keeping it from moving.
Plus just having spent the money for a new cap might scare the old one into jumping off!

 

[Thomas]

38F snowstorm clouds slowly rolling in.

Been good day got everything done I wanted
Stop by our local Kubota dealership they having spring sale on finish mowers and fluids other goodies this month...I shall return.

Well almost time shower shave put my best rags on for date night.

Enjoy your evening all.

 

[Popgadget]

Popgadget, this is a bigger speaker cab than we've seen you make before, IIRC?
Looks like it will pump out some decibels.

I was going to ask you audiophiles your thoughts on the modern amplifiers that are relatively lightweight, but claim high wattage output? I could easily understand using them, having to lug them around for gigs. My old McIntosh weighs 94 lbs., rated at 205watts per channel conservatively.

Yes that is a dual 15” ported cab, that has no mid or high drivers, nor crossover. It’s intended use is for bass guitar amplification. The other ones in these recent pictures are 3 way cabinets with a 12” woofer. They are a full range cabinet that could be used for anything, but are less efficient the the large cabinet shown. That will be used with a less powerful tube amplifier.
Modern class D amplifiers with switch mode power supplies are quite good and very light weight.

I am a retired audiophile, all of my efforts these days go towards the performance of music rather than the reproduction. But the difference between entry level gear and stratospherically priced cork sniffer stuff is no where near as great as it was in the past. Especially when you consider the vast majority of program is relatively low resolution streams and MP3’s.

To that said, I sold all my vintage Mac stuff to collectors that valued it far more than I did. Think multiple times what I paid for it new. That brings up a point, if you worked on your amplifier yourself you might seriously devalue it to a collector, regardless of how good of a job you do.

 

[rswyan]

You know, as soon as you return the JB Weld, you will need to buy some. . .

Almost guaranteed ...

 

[m7040]

Oil cap spinning

0:50Stuck oil cap spinning, easy fixYouTube · JD PopRetro50 secondsJan 23, 2022

 

[sodamo]

Just had what maybe the chance of a good CS experience.

I did a good sized online order with Lowes, paying with Paypal.
Not many minutes later I got an email cancellation due to payment.
A trip to Paypal showed the transaction as Cancelled. Checked the credit card used and no problem.

So I redo the order and resubmit. Received both PayPal and Lowes confirmation emails. Phew

Then I get a Fraud alert from Chase. Fortunately they allow me to confirm order rather that just cancelling my card.
Back to Paypal site and multiple transactions, but balance correctly.
Back to Lowes and they are showing both orders, but for some reason 1 item was split off to separate payment but still same order.

Back to Chase and my CC has been hit 18 times as pending charges. Balance now equals order x2.

Dreading I’d have to call Lowes and waste hours on hold. Lo and behold I get call from Lowes CS for clarification on the double order which both show as active in spite of their email cancellation.

Very nice CS guy cancelled right order and assured me the correct order would be ready for pickup.

Lowes confirmation email received shortly after.

Phew!!!

 

[KilroyJC]

Good Morning!!!! 40F @ 7:15AM. Sunshine and clouds mixed. High 59F. Winds W at 5 to 10 mph.
What a difference a day makes. Yesterday it looked like we'd have a few days of sunshine starting next week, now it's rain starting tomorrow for the rest of the 10-day.

At least you have some legal recourse to the barking, Mike. Around here it's an ag area, and the barking is considered acceptable farm noise. I can complain to the owners, but it does no good. It's about 1000 feet away here, too, but it's right next to their house. I don't know how they get any sleep. Maybe they're just doped up every night?

Can you get another of those oil caps, KJC? If so, you might consider destroying the cap to remove it so as not to mess up the filler neck on the oil reservoir.

Stopped by the supply store to look at the replacement roof tile while I was in town yesterday. The tile was a perfect match shape wise, but how anybody could mistake the color for brown is beyond me. Especially since I sent the salesman a photo of what I had.
View attachment 786567

I did manage to find a Ford dealer yesterday that would submit a custom order, but he was thinking it would be four to six months before it could be filled. And two more dealers said that the ordering window had closed for the year. So I started looking through inventories already on lots, and while I can't find the exact truck I want, I might be able to get close. I also found an article this morning that said Ford's CEO was going to stop sending vehicles to dealers that add anything to the MSRP. Maybe that's why so many dealers don't have inventory. My local dealer didn't have a Transit on the lot that was for sale, but he had a $100,000 Mustang in the showroom, so that correlates pretty well.

TGIF gang!

I could probably jury-IG a breather cap with some hose and hose clamps f worse comes to worse - I just don’t want smegma falling down into the engine while destroying the cap!

 

[KilroyJC]

Oil cap spinning

0:50Stuck oil cap spinning, easy fixYouTube · JD PopRetro50 secondsJan 23, 2022

Not that type of oil cap… I will have to take some pix when we get up there tomorrow. It is a combination canvases breather/fill cap, and it looks like it *should* just slip on and off. It does not appear to be a bayonet mount, just a friction fit.


this photo is NOT my tractor, just the same model, just as an interim image to give some idea :

 

[Popgadget]

Not that type of oil cap… I will have to take some pix when we get up there tomorrow. It is a combination canvases breather/fill cap, and it looks like it *should* just slip on and off. It does not appear to be a bayonet mount, just a friction fit.


this photo is NOT my tractor, just the same model, just as an interim image to give some idea :

View attachment 786666

I used to have a Case 430, and yes, the breather cap just pulled off. There are a couple of flat springs in it that kept tension on the neck. I would be careful about pulling too hard to protect the rocker cover. Maybe split it with a wiz wheel.