Good morning!!!!

   / Good morning!!!! #168,981  
Taking somewhat laid back day. New foam rollers on Flipper the Maytronics Dolphin pool cleaner.
Need on last wipe of the hot tub before refilling. Why it doesn’t drain completely leaving last inch plus just seems like bad design to me. Takes a few hours to fill, over 300 gallons as I recall. I do cheat a bit and refill from the on demand water heater.

Finally got the old wire out of my welder, but not the liner (yet). I think there is a kink. Trying to flush out with some PB Blaster and air. Glad I ordered a replacement, but maybe gun is salvageable.

Pretty day
IMG_0376.JPG

The boys enjoying.
 
   / Good morning!!!! #168,982  
I fully expect to start harvesting lynch pins any day. Sure have lost enough of them these past years and they have to be n the property.
Metal detector?
 
   / Good morning!!!! #168,984  
I did replace dad’s invention with a standard lynch pin once I put the bushings on to make the pin the right size. No problem after that.
Just talked to dad..he said the welder isn’t working, he was trying to weld something on his blade.
 
   / Good morning!!!! #168,986  
Ok, had enough for the day.....
Here's the planters in the places where they will get mounted. Need to get them leveled and secured.

IMG_1127.jpegIMG_1128.jpeg

The wind is gusting a bit this afternoon, and it got warm---- 80°. Now tomorrow morning's agenda is set.....

Time to go slap some meat on the grill.....
 
   / Good morning!!!! #168,989  
47F cloudy rain arriving after sunset.

Kinda hard to believe 1/3 off the year just about pass. :oops:

Been none productive day and this evening looks the same. :(

Enjoy your evening all.
 

Tractor & Equipment Auctions

2014 UTILITY 53X102 DRY VAN TRAILER (A45678)
2014 UTILITY...
2124 (A49339)
2124 (A49339)
2141 (A49339)
2141 (A49339)
New 2023 70in. AGROTK SSSD23 Food Plot Seeder (A49339)
New 2023 70in...
2013 Ford F350 XL (A47307)
2013 Ford F350 XL...
Toro Blower (A46684)
Toro Blower (A46684)
 
Top