70F and sunny @ 13:00, heading up to around 77F for the day's high. Promises to be a beautiful day ...
Dug out chain saw first thing yesterday, then fueled and oiled it, and tightened up the chain on the bar. Fired right up.
Then headed over to where the fallen ash tree was over on the west side of the house and cut up the section that had fallen across the path (left section) onto our property:
I was thinking that the wood would be punky and junk but it wasn't. Should make for some decent firewood for this coming winter ... just need to remove the poison ivy vines off of it:
After that I rounded up most all of the chains and hauled them over to the west side of the house.
Was hoping that there was enough length to hook up on one of the broken off trees and and then pull it down:
Had enough length ... but there was just way too much weight on the end to get it to move (it's the tree in the center of the picture below):
So I headed off in search of other tasks.
Got grapple removed from shop and parked it over in the second circle.
While I was doing that The Woman headed over to the northwest hosta/rhododendron planting bed and started weeding the thistle out of that. Says She got about half done ...
I decided to pull the nails out of some old PT 2 x 12's and 2 x 8's so I swapped out the bucket for the pallet forks and brought those down from shop and put them on the saw horses.
Observed House Wren exiting from Nest Box No. 2 ...
After I had all the nails pulled I put them on the south and east edge of the garden to serve as a little weed/erosion control.
Once that was done I gathered all the weeds The Woman had pulled and took those up to the compost pile.
Then I started mowing down here around the house and got most of the back and some of the sides done.
Finished off the ribs for dinner.
Moved Light Material bucket into the shop for wing welding, closed the overhead door, and started a fire in the stove. Brought Kubota back down to the house.
Ran up on the Cub and checked mealworm feeder, was 3 or 4 worms left.
Headed over to the shop and got the wings welded on the Light Material Bucket to finish the day:
Woman currently around back working on weeding.
Plants are "Out For Delivery" via USPS ... so likely some work there.
Refill hopper feeder and likely mealworm feeder as well.
Otherwise probably back to mowing for me ... after a trip down to the corner for fuel ...
Hope everyone is having a great Monday ...
