Good morning!!!!

[txdon]

Good morning! A Cool 58˚F with partly cloudy skies and northerly winds turning easterly and warming up to the mid 80s.

Cloudy skies and a few drops of rain kept the crowds down at the "Farm" this weekend. The only special activity was picking 40 varieties of flowers which were in full bloom.

I held my first tractor training session and my one student passed. It works best with 6 drivers and we were down to four.

Next week the peach orchards will open up for the first picking and the "Farm" will be serving BBQ for the Memorial Day weekend. If there is no rain I expect larger crowds. The trailers need work one tire came off one and on the other one the canopy was ripped by the wind and was taken off.

 

[KilroyJC]

Good evening all. 57ºF for the start, overcast, light breeze. Light wind, overcast partially cleared later in day, and high temp was 81ºF and low humidity. Chapel to start day, pancakes for breakfast, putter, swept front porch, Kitchen clean up, replaced bolt on new mower, did get nap in. Grill brats for dinner. Sounds like most of you you were as happy about the garage ale score as I was. Will put it to work tomorrow.
Randy(wag) sorry about the gals warnings. Glad the race had no issues, 10 hours does make for a long day. Hope the next race goes well.
Ron glad you survived yesterday. Nice fix on bird house. Hope retaining wall work went well. Nice cardinal pic.
Kilroy sounds like you are having a lot of fun getting property shaped up.
Kilroy sorry about the rain at the last night. Bet the show was nice. Hope you have good visit with relatives.
Billy trying to give RS a run for most productive on GM Thread?
Buppies glad you got the grass mowed. prayers sent.
Drew good luck keeping critters under control
Thomas Hope your day goes well, sounds like you don't want anything to do with rose bushes.
Kilroy congrats on meeting woodlot neighbor. Engine locking up id never good.
Jay nice rain. Hope the smoke level is going down. Hope you able to enjoy the day and good luck with garden.
Bill hope you enjoyed your seat time.
Frits Looks like a lot of work to mow around all the tree shelters. nice pic
Buppies nice joke.
Paul dreariness does challenge the motivation more. Good luck with the paperwork for Marsh Harbor.
James sorry about the long trips to set up the docks, remember any day on the lake is a good day Hope the gazebo project goes well. The renters do sound serious.
Frits impressive list, got good life from the generators and starters.
Joel that is is an old steel bridge!
RNG good to hear mowing progressing and flail was easier to put on than brush hog. Are the speakers working properly now? Sounds like progress on light. Hope Starlink will continue to add satellites to help your internet speeds.
Ted Sorry about no additional rain yet. Sorry about the ruts, hope you can get gravel done soon. Hope knee behaves for a change.
Ken sorry about the brake issues. Hope you got the issues cleared up. Good to hear dog better.
RS hoe you had a productive Sunday.
David hope you are holding up with the days of pw.
Jay neat pic, is the bird on left showing aggression?
Frits thanks for sharing pics, must have been nice ride.
Drew hope mowing went well.
Dennis hope discussion went well. Nice pics.
David bet part of you is going yea, a delay
David neat story.
David good story on the machine operator.
Frits thanks for sharing daughter's adventures and pics.
Frits wonder how on the magnetic plug is normal. Sorry about the ongoing tool hunt. Was the filter pic the before or after pic?
Drew makes you wonder how much thread wear from changing spark plugs.
Thomas glad day not overwhelming. Good to hear black flies not a problem. Hope evening went well.
Newbury "when do we stop buying tools" My answer is never
Bill good to hear stump removal in full swing.
Drew some of the sports drinks have caffeine in them as well as sugar or sweetener.
Dennis neat battlefield pics
Ken glad car is still working, dog is better. My condolences on loss of your friend Tommy. Nice radishes.
Frits well traveled tool box.
Randy(wag) good luck find and mailing gift to friend.
RS busy day today.
David nice progress and pic.
prayer for all, especially Jay/Peg, Kyle /Daughter, /mom's breathing, /learning new job, /friends upcoming new baby, /son's migraines, Bird /aging issues, Ron /heart, Billy /mom hypertension & congestive heart failure, David(moss) /remodel, /divorce, Buppies /new skin cancer spot and treatment, /back surgery healing, /wife knee healing, Thomas /gout, Phil /reflux, Frits /veteran son with mental issues, /granddaughter with Evans Syndrome, Ken /dad possible dementia, Steppenwolfe /son-auto immune disorder, Grev /wife's eye, Ted /knee recovery, /retirement & disability red tape, /family issues, Lou /eye issues, /loss of brother, /heart issues, Doug and wife/health issues, / hand nerve and surgery, /fall and recovery, / wife headaches and heart eval, / David(sadamo)/Sophie's and David's new eye surgery recovery, Chris /neighbor's granddaughter and Covid issues, Scaredy/shoulder dislocation, /marriage dissolving, / friend stop drinking, Paul/ wife's healing from back surgery, Dennis /retirement, /neighbor issues, /land development, /favorable winds not in the forecast there "alligallyitus" and back in hospital, Drew /back operation issues, /friend's wife cancer diagnosis and recovery, mike /wife's healing from surgery, Scotty /back pain, Helogabals /second opinion, /wife's friend situation, Fatjay /father broken hip, Ukraine war, and Country.

Relatives heading out tomorrow morning, good trip to brunch yesterday, hung out for a couple hours with them at mom’s. Going to do some local activities with the, today, and dinner at local BBQ.

as to engine “locking up”: is it a cooling issue? Is it a parts breakage issue? Is it some other issue? Too many projects to worry about it right now, but I would not mind having that in the arsenal. Also found out that the backhoe that is in the far-side tree line (completely engulfed in vines) is also a Case machine but no model/year info available… baby steps…

 

[Looking4new]

Good morning, the low temp is 36 and the high to 66°F. Wind variable and light. Zero % chance of precipitation. Another good day for pulling/digging stumps.
I'll go over at about 11, I would rather be there now, but the nearest neighbour is 200' away. Also the hired help (my stepson) doesn't like to start work early, even though all he has to do is run the electric chainsaw and move the tractor.

He has a kittie babysitting job (feeding) for the next 3 days on top of the stump removal job. It is a good thing they are both at the same address.

That is my day mapped out.

Have a safe day all

 

[KilroyJC]

Good Morning!

God has given us another chance to get it right (or at least not screw up too badly).

58.3F, going to mid-70s, mostly cloudy forecast.

yesterday got higher than expected, into mid-80e, and then an unexpected shower hit as we were lounging on the deck. It lasted for almost an hour, so the nice evening ended up being spent indoors.

Planted the dig tree up at the woodlot, didn’t do any other work yesterday. Spent most of the day with relatives.

today is morning chiro visit, then more time with relatives. I would like to take them up to the woodlot for a tour but my uncle is now mobility-limited and permanently on O2 due to complications from something that discussing here would get me thrown in TBN Timeout.

Tuesday they head off to their daughter’s for grandson’s HS graduation this weekend, and hopefully they have good weather for traveling.

Another cuppa is calling to me…

I hope everyone has a happy healthy safe productive blessed day!

 

[m7040]

Mostly, I think the magnetic sludge deposit is normal. The oil that drained out look like new Kubota UDT oil. No different than the new oil. Good thing the mag plug was there to catch it and prevent it from floating around the transmission. It is not a filter just a mag plug to catch anything metallic. Did not see any visible particles

 

[m7040]

Good Morning.
It was 47 when I went outside with Zoe this morning. High in the 70’s expected. I’ll almost certainly experience the 80’s or more, as I’m of to the Bahamas and south Florida today.

Yesterday was productive, made progress on the little plane, made a mess in the shop repairing chisel plow for neighbor, and cleaned it up.

View attachment 801692

Will be interesting to see how it holds up. I had some help, here he is at the sink after washing up.

View attachment 801693

We got his grandmother’s car unloaded from the farmers market, made a large bowl of chicken salad, checked on my preparations for todays trip and called it a day.

Today will be spent looking out or windshield or playing the video game in front of me. Should be home in time to take Zoe to school this evening. Got to get going now.

He is a good looking grand son. You must be a very proud grandpa
That welding repair looks good, good penetration. Was it stick welding or wire welding and how high was the heat setting?

 

[kenmbz]

Morning all, 55 going up to 79 and sunny.
Off to Dr. this morning for annual physical.
Talk about tools, picked up a 24" breaker bar, for when the impact wrench is struggling.
Brakes held up and problem seems solved.
Dog was dancing when I gave her the chicken and rice for breakfast this morning.

Sodamo, that's a lot of powerwashing, your place has so many great views and seems every angle looks amazing.

Popg-your help for everyone is great and the grandson is certainly getting taller, it's great he likes getting involved.

Drew - hearing your stories in person and online is a treasure, Family fun with fireworks and plenty of duck and cover moments.

Back to the day job,
Be well

 

[buckeyefarmer]

This is the bird house I repaired for neighbor Saturday.
View attachment 801689

High rent district. Nice.

 

[RedNeckGeek]

Good Morning!!!! 66F @ 4:15AM. Sunshine to start, then a few afternoon clouds. High near 95F. Winds SSW at 5 to 10 mph.

Never throw anything away, right Frits?

No such thing as too many tools. The problem is finding the right one when you need it.

Finished mowing the upper meadow, and worked through the part with the most trees, too. Pretty slow going, but glad there were no pucker moments. Today I'll start on the back yard, unless the stucco guys show up again. If they do, I'll run the string trimmer up along the driveway. Not sure what else I'll get into, but might not be more than an afternoon siesta.

Almost noon yesterday and noticed a little engine shaped icon lit on the tractor dash. Looked it up and it had something to do with emissions, and the engine running too hot. The temp gauge looked fine, but when I checked the radiator screen it was pretty well plugged with weed seeds. And the air filter needed cleaning as well. Lubed the FEL while I was at it. Seems like ten hours of operation doesn't last as long as it used to.

Hope everyone's work week gets off to a good start.

 

[m7040]

I was always trying to get our sons involved in the shop and repair activities but no such luck. A couple of the girls were much more involved in repairs and taking care of the goats doing milking feeding and clean up. Our granddaughter when she stayed with us I took everywhere and got her involved at an early age.