Shaver HD8 return line

   / Shaver HD8 return line #31  
Hightide did you ever find out the exact thread and diameter? I bought an HD8 and I'm running into the same problem and I have about 60+ acres that I should already be fencing. Thanks for all of your feedback, this is the only place on the internet that I have found any info on the cap and thread at all! I have an RK55 but it appears that the RKs are basically Mahindra clones, at this point I may have to order a Mahindra adapter and cross my fingers (Shaver has some) because there's no info on the RK.
 
   / Shaver HD8 return line
  • Thread Starter
#32  
I ended up putting a 6 inch plastic 3/4 nipple on the end of the return hydraulic hose and sticking it in the fill port. I then used a bungee to hold it in place. 500+ posts and working good.
 
   / Shaver HD8 return line #33  
I ended up putting a 6 inch plastic 3/4 nipple on the end of the return hydraulic hose and sticking it in the fill port. I then used a bungee to hold it in place. 500+ posts and working good.
I contacted Shaver and it turns out that they have adapters for various makes of tractors including Mahindra and RKs. I ordered a Sm-41-R adapter and picked up a piece of 4" 3/4 pipe to get past that hydraulic stub that's next to the reservoir. (I hope no one is an idiot and tries to temporarily remove the stub (optional hydraulic port/hookup?) like me, I lost a couple of ball bearings, hopefully it still works fine since I don't think it was actually used for anything).
 
 

Tractor & Equipment Auctions

2017 Makita HM1307CB 35lb Demolition Hammer (A49461)
2017 Makita...
2014 Ford F-350 Omaha Crane Service Truck (A48081)
2014 Ford F-350...
2016 Hyundai Sonata Sedan (A50860)
2016 Hyundai...
1500 Gallon Water / Chemical Tank (A50860)
1500 Gallon Water...
2013 Audi Q7 AWD SUV (A48082)
2013 Audi Q7 AWD...
1266 (A50490)
1266 (A50490)
 
Top