Importing and modifying a new mini excavator from China

   / Importing and modifying a new mini excavator from China #511  
Found on FaceB in Merrill WI. Is this kinda the same machine?
---------------------------------------------------
2022 Shalka XG13 Mini excavator. 5 hours on the ticker. Nice little machine. 8500.00 FIRM Possible delivery.
355127521_6571291052892948_6049383829809091538_n.jpg
 
   / Importing and modifying a new mini excavator from China
  • Thread Starter
#512  
Found on FaceB in Merrill WI. Is this kinda the same machine?
---------------------------------------------------
2022 Shalka XG13 Mini excavator.
Essentially the same machine, yes.

I can see slightly different boom brackets, swing-boom, cyl protection plates, Rhino-style plastic console cover. The name implies slightly heavier unit, but it looks like the usual 36-37" dozer blade. Same standard crappy bucket.
 
   / Importing and modifying a new mini excavator from China #513  
What do these little units weigh? They just look far too small and light to actually dig a bucket that big into the ground without just pulling the unit itself all over the place.
 
   / Importing and modifying a new mini excavator from China
  • Thread Starter
#514  
What do these little units weigh? They just look far too small and light to actually dig a bucket that big into the ground without just pulling the unit itself all over the place.
Most are 2000-2200 pounds. There are bigger units as well.

For as light at they are, starting a hole is easiest (greatest downforce) with dozer blade down and behind you. Once your hole is started, blade down in front anchors the machine best (resists pulling).
 
   / Importing and modifying a new mini excavator from China #515  
Heavier than I expected for as small of footprint as they have. They look like half the size of my JD x758 garden tractor which is less than 1500#. Must be a lot of steel hidden in there.
 
   / Importing and modifying a new mini excavator from China #516  
Agt,Cgf and Fj Industrial all sell a similar machine. The swing boom is a real bonus in my opinion. All seem to come out of Shang Dong.
Quoted weight is 946Kg.
 
   / Importing and modifying a new mini excavator from China #517  
Has anyone attempted an Oil Temp Gauge? I was thinking to tap the Tank for the sensor.

1687282234562.png
 
   / Importing and modifying a new mini excavator from China
  • Thread Starter
#518  
Has anyone attempted an Oil Temp Gauge? I was thinking to tap the Tank for the sensor.
See post #41 above. That's a capillary style temp gauge, which works fine on my machine.
 
   / Importing and modifying a new mini excavator from China #519  
See post #41 above. That's a capillary style temp gauge, which works fine on my machine.
I am not getting the Capillary Tube idea. If it would fit through the Fitting?

So the Return Hose to the Tank has an exit port? Or did you add a TEE, and leave the Sending Unit in the bottom of the tank?
1687289136628.png
 
   / Importing and modifying a new mini excavator from China
  • Thread Starter
#520  
I am not getting the Capillary Tube idea. If it would fit through the Fitting?

So the Return Hose to the Tank has an exit port? Or did you add a TEE, and leave the Sending Unit in the bottom of the tank?
Yes, I used the tee fitting so I could put a capillary tube in the tank. The other drain on the tee is the case drain from the distribution valve. I doubt much oil goes thru that hose, and it was simpler than teeing it into the return line upstream of the added hyd filter.

Note that I disconnected the original return line from this tee, and fabricated a new larger return line next to the new hyd filter.
 

Tractor & Equipment Auctions

2006 Ford F-150 Pickup Truck (A48081)
2006 Ford F-150...
Tubing A500 Grade C 6in. SQ X 1/4in. X 28ft. (A50860)
Tubing A500 Grade...
2003 21ft Center Console Fishing Boat with T/A Boat Trailer (A48082)
2003 21ft Center...
2019 Komatsu PC490LC-11 Hydraulic Excavator (A49461)
2019 Komatsu...
2001 Subaru Outback AWD SUV (A48082)
2001 Subaru...
Misc. Office Furniture (A50860)
Misc. Office...
 
Top