VroomVroom
Platinum Member
- Joined
- Apr 30, 2010
- Messages
- 945
- Location
- Newfoundland
- Tractor
- Mahindra 2816 HST, Super M farmall, J5 bombardier, 230 timber jack skidder
Above
Tractors and wood! Show your pics
- Thread starter Bota4me
- Start date
- Views: 4370794
Sawyer Rob
Super Member
Well, it was time to cut down these two trees,
My buddy and me, used the skidding winch on my tractor to winch out the hangers and then put the winch line high up in the tree to winch it over,
With that done, my buddy cut the notch,
and he did the back cut, then I winched the tree over. With the tree on the ground, we limbed and cut it into sections and winched the logs out of the way,
This tree was over 30" on the stump,
With THAT done, we put the winch line up in the second tree,
Then it was "rince and repeat", and this tree is even bigger, at over 40". Here's my buddy standing next to it,
That was enough for one afternoon, I'll get back on that project later!
SR
My buddy and me, used the skidding winch on my tractor to winch out the hangers and then put the winch line high up in the tree to winch it over,
With that done, my buddy cut the notch,
and he did the back cut, then I winched the tree over. With the tree on the ground, we limbed and cut it into sections and winched the logs out of the way,
This tree was over 30" on the stump,
With THAT done, we put the winch line up in the second tree,
Then it was "rince and repeat", and this tree is even bigger, at over 40". Here's my buddy standing next to it,
That was enough for one afternoon, I'll get back on that project later!
SR
Those were solid trees! They will give you a workout cutting them up.Well, it was time to cut down these two trees,
My buddy and me, used the skidding winch on my tractor to winch out the hangers and then put the winch line high up in the tree to winch it over,
With that done, my buddy cut the notch,
and he did the back cut, then I winched the tree over. With the tree on the ground, we limbed and cut it into sections and winched the logs out of the way,
This tree was over 30" on the stump,
With THAT done, we put the winch line up in the second tree,
Then it was "rince and repeat", and this tree is even bigger, at over 40". Here's my buddy standing next to it,
That was enough for one afternoon, I'll get back on that project later!
SR
Sawyer Rob
Super Member
Both of those trees are going to be firewood, but it's still going to take some work to get them there.
SR
Alan46
Veteran Member
Well, it was time to cut down these two trees,
My buddy and me, used the skidding winch on my tractor to winch out the hangers and then put the winch line high up in the tree to winch it over,
With that done, my buddy cut the notch,
and he did the back cut, then I winched the tree over. With the tree on the ground, we limbed and cut it into sections and winched the logs out of the way,
This tree was over 30" on the stump,
With THAT done, we put the winch line up in the second tree,
Then it was "rince and repeat", and this tree is even bigger, at over 40". Here's my buddy standing next to it,
That was enough for one afternoon, I'll get back on that project later!
SR
How did you get your line up so high?
Good job!
Sawyer Rob
Super Member
ning
Elite Member
A+ using protective gear + buddy system!Well, it was time to cut down these two trees,
My buddy and me, used the skidding winch on my tractor to winch out the hangers and then put the winch line high up in the tree to winch it over,
With that done, my buddy cut the notch,
and he did the back cut, then I winched the tree over. With the tree on the ground, we limbed and cut it into sections and winched the logs out of the way,
This tree was over 30" on the stump,
With THAT done, we put the winch line up in the second tree,
Then it was "rince and repeat", and this tree is even bigger, at over 40". Here's my buddy standing next to it,
That was enough for one afternoon, I'll get back on that project later!
SR
Gordon Gould
Super Member
- Joined
- Apr 1, 2007
- Messages
- 6,626
- Location
- NorthEastern, VT
- Tractor
- Kubota L3010DT, Kubota M5640SUD, Dresser TD7G Dozer
Well, it was time to cut down these two trees,
My buddy and me, used the skidding winch on my tractor to winch out the hangers and then put the winch line high up in the tree to winch it over,
With that done, my buddy cut the notch,
and he did the back cut, then I winched the tree over. With the tree on the ground, we limbed and cut it into sections and winched the logs out of the way,
This tree was over 30" on the stump,
With THAT done, we put the winch line up in the second tree,
Then it was "rince and repeat", and this tree is even bigger, at over 40". Here's my buddy standing next to it,
That was enough for one afternoon, I'll get back on that project later!
SR
Can't wait to see them piled in your wagon
gg
Alan46
Veteran Member
