Battery powered chainsaw

[arto98607]

14.6 pounds as verified on my scale

Interesting, my 25 year old small professional model saw with 16" bar weighs about 11 lbs.

 

[xyz123]

$250 for the
$250 for the saw, battery and charger. That's the 2ah battery. My gasser is an Echo CS400

Going to save your feedback to my website and group on chainsaw repair. So others can see it that are looking. Thanks.

 

[xyz123]

Interesting, my 25 year old small professional model saw with 16" bar weighs about 11 lbs.

Dont forget to fill up with mix and bar oil.

Just PHO no bar and chain to show which adds depending on set up. Dry and wet full weight.

 

[CloverKnollFarms]

The battery powered saws do suffer with regard to weight. And the battery I have is the smallest. I'd like the 4ah, but don't want the weight. I'd rather carry my spare 2ah.

 

[xyz123]

The battery powered saws do suffer with regard to weight. And the battery I have is the smallest. I'd like the 4ah, but don't want the weight. I'd rather carry my spare 2ah.

We do the same for wives stuff. She wanted light trimmer etc etc.
The batteries come into play with that. So we keep them small too.

I used her batt polesaw during storm clean up since I sold of my echo pole saw and didnt want to use the hand one.

 

[ArlyA]

The battery powered saws do suffer with regard to weight. And the battery I have is the smallest. I'd like the 4ah, but don't want the weight. I'd rather carry my spare 2ah.

I agree. In some situations I love my little battery saw but over the weekend we cleared trails all day long and had to leave them in camp.

 

[Grumpycat]

The battery powered saws do suffer with regard to weight. And the battery I have is the smallest. I'd like the 4ah, but don't want the weight. I'd rather carry my spare 2ah.

Is important to mention your voltage because a 4Ah 40V is equivalent to a 2Ah at 80V.

 

[CloverKnollFarms]

Is important to mention your voltage because a 4Ah 40V is equivalent to a 2Ah at 80V.

Its 80v. Which I do like, because it has great chain speed

 

[Grumpycat]

Its 80v. Which I do like, because it has great chain speed

I think it will have whatever chain speed the designer chooses no matter what voltage.

 

[CloverKnollFarms]

I think it will have whatever chain speed the designer chooses no matter what voltage.

I'm my experience, the lower voltage saws, have progressively lower speed. Design or not, that's just a fact. 40v were slower than 60v and the 80v is by far the fastest of the electric saws I've used. The 40v saws I've used you can almost see the teeth moving