Good morning!!!!

   / Good morning!!!! #178,681  
Well we got a tarp over one of the shelters. It took 2 hours for the two of us, right from cutting the old roof cover off and stowing that in the trailer for the up coming dump run, to putting up the new tarp and tieing it down..

daugen, so far at 78 I haven't had any flashbacks. I did a lot of 'cid in my day. Before my trucking career took off. Although you could get your 'big truck license' at 21, the insurance companies wouldn't touch you until 25 in Ontario.
 
   / Good morning!!!! #178,683  
Got most of the back wall done in the shed, I have to mill a bunch more lumber to finish, but today was a good start.

sitting on the deck now, color is really coming in- sourwoods are red, poplars are either yellow or have dropped leaves already, and oaks are beginning to participate:

IMG_4615.jpeg


IMG_4616.jpeg
 
   / Good morning!!!! #178,684  
Killroy, two egg beater drills.
The larger one is a two speed but does not turn. Maybe just need to be soaked. ??
The smaller is a Stanley handyman drill and comes with a screw on top. It is in fine working order.
$10 each however the shipping for both is $65 and shipping just for the Stanley is $40. If you know a cheaper way to ship let me know. The guy at the postal place just measured and did not weigh the drills. If you need more pics let me know.
71881764059__AC254302-04E0-4F70-935D-0F63E3923CDC.JPG
IMG_2332.JPG
IMG_2331.JPG
IMG_2330.JPG
 
Last edited:
   / Good morning!!!! #178,685  
Killroy, two egg beater drills.
The larger one is a two speed but does not turn. Maybe just need to be soaked. ??
The smaller is a Stanley handyman drill and comes with a screw on top. It is in fine working order.
$10 each however the shipping for both is $65 and shipping just for the Stanley is $40. If you know a cheaper way to ship let me know. The guy at the postal place just measured and did not weigh the drills. If you need more pics let me know.
View attachment 826589View attachment 826590View attachment 826591View attachment 826592
I remember using bigger hand drill for drill holes for sugar taps.
 
   / Good morning!!!! #178,686  
50F more clouds than sun couple good heavy rain showers during the day.

Busy day at work...whew.
Rain wind shook lot of leaves from the trees today. :eek:
Plans for tonight....????'s not sure.

Enjoy your day all.
 
   / Good morning!!!! #178,687  
Killroy, two egg beater drills.
The larger one is a two speed but does not turn. Maybe just need to be soaked. ??
The smaller is a Stanley handyman drill and comes with a screw on top. It is in fine working order.
$10 each however the shipping for both is $65 and shipping just for the Stanley is $40. If you know a cheaper way to ship let me know. The guy at the postal place just measured and did not weigh the drills. If you need more pics let me know.
View attachment 826589View attachment 826590View attachment 826591View attachment 826592
Hmmm. I can see how that is supposed to be 2 speed, but don't see how the bigger gear would line up. Maybe I'm looking at it wrong.
 

Tractor & Equipment Auctions

2011 MAGNUM PRODUCTS LIGHT PLANT/TANK TRAILER (A58216)
2011 MAGNUM...
2003 Club Car Electric Utility Cart (A56859)
2003 Club Car...
2018 Chevrolet Colorado Pickup Truck, VIN # 1GCHSBEA6J1312961 (A57453)
2018 Chevrolet...
2017 John Deere 6120E (A53317)
2017 John Deere...
Adams Tender / Magnolia Trailer (A56436)
Adams Tender /...
Craftsmen Air Compressor (A57454)
Craftsmen Air...
 
Top