Good morning!!!!

[riptides]

It's Monday, I'm up. What the F... do you want?

Your late and grumpy.

 

[gstrom99]

Well, me and my lift passed the "first lift test". This was the first time I've set and lifted a vehicle in 40 years, and it was MY lift. I was a bit nervous, but it/we did just fine. The big shop work is now done. Next is hanging/placing the cabinets and putting all my stuff away. I first have to to put together and install a DK2 and front receiver plow on the SIL's truck. This is why I built this shop anyway, right? Will get on that today...

 

[Popgadget]

You may want to consider selling bags at the markets where you wife sells the socks. Nuggets of gold!

I’m not going to suggest that! Loading it into the dump trailer is slow enough.

 

[Buppies]

Drew sad Cat no longer makes those engines due to emissions. Skid loader motors Kubota imagine that. Paver engine Italian

 

[kenmbz]

Morning all, 42 going up to 50 and sunny.
Made it through the travels and travails yesterday into Manhattan.

I just did not eat anything until we got home. Long day, left at 9:30 am, got home 9:30pm
With about 30 people in our group, many teenagers, it was quite loud.
No one lost.

Met up with some of my local friends and wife's city friends, Brother and his family showed up as did my cousins.
So my son's band had plenty of support.

Sorry to hear about the club RNG, may father belonged to a smaller club that used to do cross country rides, they were from all over US and got to meet many of them, they rode everywhere until they got too old.

Town inspector just came over to go see the oil burner and have a green tag now. All good.

Took day off to sleep in, knew I would be tired. Not being able to eat before/during trips is quite limiting. Lost over 18 pounds so far in three months.

Be well,

 

[sodamo]

67°F and .69 inches rain. Feeling blessed.

More rain welcome.
Need to make a PO run this morning.

In person Happy Hour at a neighbors this afternoon

Prayers for all
Be safe
Have a great day

 

[sodamo]

I’m another of the minimally dressed crowd many days are bvds and a tee. Shorts added if I have to leave the property ans rubba slippers outside.

 

[Helogabals]

Took a while to clean it off first, pretty grimed up. Battery still showed full, off I went.

I have bike carrier for my Tesla, also mounted on Anhangerkupplung (hi Scott )
You can carry bikes like that only when it's dry.
Once I saw first pics of your RV with bike on the back, I immediately notice - good for Florida man, will not work here

But other than that - great
really would love to go for similar trip

Good Afternoon Helo,

Unsere Litauen freunde geben uns ein bisschen geschenke !
Diese gerat halten unsere handtuche zu das strandstuhl !
Machst aus weiBe oak ! Wir sind glucklich uber das !

Yeah, that's nice thing.
I feel like I should put a picture from our beach
Baltic sea:

Neither the BMW Rider's Association nor the BMW Motorcycle Owners Association hold much attraction for those of us riding the older bikes, Paul. Neither do the newer BMW motorcycles. BTDT, and now I have lots of T-shirts to wear for dirty jobs around the house and garage.

Hello beamerist !
I have third in row R xxxx RT. Started with oilhead already - 1150. Never owned any airhead.

Here in North salty roads have done a lot of damage to older rides
In south EU sometimes can be found really nice looking vintage BMW's. Not sure how they are socializing. IMHO they are not "clubbing".

This is me and the boys in Sardegna:

Mine is grey one
That red one is not with us

Helo, cool that you are working with Ikea. I have assembled a number of their products...tolerances always been very precise.

Actually with their "flat pack" furniture it is not THAT bad.
Engineers be like: If you can't be precise, make error in direction which is good for you. That principle works well with FP furniture
OK, margin is not very wide. Force to be applied on assembley has to from 10 to 20 kg. Roughly. If it's less - connection will not hold together. If it's more - average consumer will take big hammer and will start hammering
But to work in such tolerances is rather easy

Absolutely worst are "transformers". I don't know how you call that items, which could be assembled in different ways
There is no margin for error.
Example: leg&go balance bike. Transformable. Long-lasting. Sustainable.

I am really proud of this product. But it took a long while before it was made "sell-able". Again, I was only supporting producer, which is working with machines supplied by me

 

[sodamo]

I’m not going to suggest that! Loading it into the dump trailer is slow enough.

Maybe an opportunity for a local youth?

 

[kenmbz]

We ran into a few sailors in NYC after the concert, my friend and his wife bought them drinks and we chatted with them for a bit.

Were in town for a while and touring around, good kids.

Their ship is a pretty special one:

USS New York: A City on the Sea

With a simple and powerful motto, the Navy’s USS New York demonstrates military might and is a symbol that the world will “Never Forget” the 9/11 attacks.

www.defense.gov

Parts made from the twin towers.