Wagtail
Super Star Member
- Joined
- Jan 15, 2013
- Messages
- 12,525
- Location
- St Helens, Tasmania, Australia
- Tractor
- JD 4105 / JD Z355E (48" deck)
Congratulations on your new rig.
New NS4710C HST
- Thread starter txbonds
- Start date
- Views: 10126
Dave Canfield
Silver Member
- Joined
- Jul 31, 2008
- Messages
- 161
That's still a way nicer place to park than what I have!
Thank you. I feel blessed. Spent a recent weekend putting that extension on just for parking a tractor next to the backhoe.
That’ll work just fine.
Got a chance to add a few of my new items this week.
Added one of the ITC grill guards.
Added a tilt cylinder from Michigan Iron. The top link cylinder will sit in the box until I get the second rear port installed.
And I installed 3 of my 4 sets of lights. Driving lights in the front and two sets of flood lights in the back. One set is on an adjustable bracket so I can move them easily as needed. The 3rd set of floods is in the box still but plan to add them to shine to sides on the front. Just need to figure out location.
My 3rd function kit didn’t make it in time so it will probably be a week or two before I can get it and the second rear port installed. Will probably work on getting my Sabre Samurai mount setup over the weekend so it’s ready to use once 3rd function is installed.
Also, came across an older lighted dealers clock for sale. Couldn’t resist.
Added one of the ITC grill guards.
Added a tilt cylinder from Michigan Iron. The top link cylinder will sit in the box until I get the second rear port installed.
And I installed 3 of my 4 sets of lights. Driving lights in the front and two sets of flood lights in the back. One set is on an adjustable bracket so I can move them easily as needed. The 3rd set of floods is in the box still but plan to add them to shine to sides on the front. Just need to figure out location.
My 3rd function kit didn’t make it in time so it will probably be a week or two before I can get it and the second rear port installed. Will probably work on getting my Sabre Samurai mount setup over the weekend so it’s ready to use once 3rd function is installed.
Also, came across an older lighted dealers clock for sale. Couldn’t resist.
Last edited:
tacticalturnip
Elite Member
Very nice; if I may, what about the NS caught your eye over the NX?
Thanks. It was real simple. The NS was the model they had on the lot. However, after lots of reading it looks like some of the NX models may have been having issues so from that standpoint I guess I’m glad to have the NS.
YLee Kioti
Platinum Member
Congrats, NICE rig......!!!!!
Gotta look at the spec on that one.
Looks like a 10 foot bat wing would be perfect fit.
Gotta look at the spec on that one.
Looks like a 10 foot bat wing would be perfect fit.
The Gaul
Bronze Member
Thanks for sharing. I personally took delivery of my NS6010C HST 3 months ago and couldn't be happier.
List of my upgrades :
List of my upgrades :
- Aftermarket bluetooth radio + speaker upgrade (I created a DIY post on that)
- Filled rear tires with RimGuard
- Ni-lights X4
- Hydraulic top-link
- Kioti Rear Wiper
- Kioti Linked Pedal
- Kioti third function
- I installed all of the above myself. Sitting on an extra rear remote kit now and hesitant to start install since the instructions tell me to remove the rear wheel. Will try to tackle once the weather gets a bit better.
- Completed my 50 hour maintenance. Really easy, with the exception of the @#$^%#!!! hydraulic filter which seemed to be welded to the tractor.
