LS Tractor Owner
Super Member
- Joined
- May 1, 2017
- Messages
- 7,556
- Location
- Edgewood, NM
- Tractor
- LS XG3025 TLB, Previously MT125 TLB, Craftsman GTS6500
Good morning! Low of 37°.... wow! High today should hit 48°. Sunny, but the wind again... 25-35 mph with gusts to 60 mph.
Drew, you will scare the snow away now that you're totally prepared! The worst thing I caught with the snowblower was a 4" log sticking out.... BANG
️ the shear pins didn't even break, but it did a number on the gearbox.
Replaced the gearbox and the second time using it, got a big 2 1/2" rock that surfaced from the drive base. Took out the gearbox again..... sold the blower to the neighbor for $50.
RNG, your upbringing as far as getting "informed" about finances is very similar to mine.... learn as you go..... I can see how it can go either way. With today's technology, I think there are more ways for people to be exposed to financial information. Whether a good choice is made --- that's another story......
Dennis, your area sure is cold! Add a little moisture = bone chilling..... Stay warm!
Phil, some more beautiful pieces! Nice grain. Maybe someday I'll get a lathe. Then I'll never have any time.....
Scott, any more work on the seats? We did some preliminary sketches for the corner cabinet, subject to change of course. The question remains to add a couple drawers or not.....
Gonna try to get the shelves stained today. Wishful thinking.....
Everyone have a great day!
Drew, you will scare the snow away now that you're totally prepared! The worst thing I caught with the snowblower was a 4" log sticking out.... BANG

Replaced the gearbox and the second time using it, got a big 2 1/2" rock that surfaced from the drive base. Took out the gearbox again..... sold the blower to the neighbor for $50.
RNG, your upbringing as far as getting "informed" about finances is very similar to mine.... learn as you go..... I can see how it can go either way. With today's technology, I think there are more ways for people to be exposed to financial information. Whether a good choice is made --- that's another story......
Dennis, your area sure is cold! Add a little moisture = bone chilling..... Stay warm!
Phil, some more beautiful pieces! Nice grain. Maybe someday I'll get a lathe. Then I'll never have any time.....
Scott, any more work on the seats? We did some preliminary sketches for the corner cabinet, subject to change of course. The question remains to add a couple drawers or not.....
Gonna try to get the shelves stained today. Wishful thinking.....
Everyone have a great day!