Need a recommendation: log splitters

[oosik]

I've always wanted to go back to burning firewood. I have 100% Ponderosa pine here. I did burn firewood for the first ten years we were here. I liked everything about this. Except - the dirt and bugs that came into the house with the firewood.

That was 40 years ago. Now - I would need a larger splitter with log lift/log split catch systems. The pines here are all VERY large and not the easiest to man-handle. That's the reason we got away from firewood.

Ah - it's nice to dream. At least I can go out into any of my pine stands and still get that piney smell.

 

[terraformer]

We got one at tractor supply about 12 years ago. Use it to process about 10 cords a year. It is 28 tons I think we paid an extra 100 for the honda cg engine.
After two years the engine lost compression. I found out that this is common with Hondas that are run on gasohol. One of the valves were stuck and was not a warrantee item. Was able to get the valve unstuck and only run it non alcohol fuel and have had no problems.
Most of our wood is oak and hickory the hickory is the hardest. It has never failed to split.

The design has some compromises with the motor configuration Something that you should look at. For instance the dipstick/oilfill is fairly hidden. It takes a long funnel to fill it. There is a casting on the other side to put them but no cap is in there.

The exhaust blows against the tank. I removed the muffler and welded in a bent pipe and extend the exhaust out well away of our work area. Makes the environment much quieter and less fuel smells.

The motor has run fine since I got the valve freed up.

 

[ultrarunner]

Have a little DUER 22 ton with 3.5 hp Briggs…

Splits all my oak and the vertical option is great.

Only complaint is the Briggs is loud so hearing protection a must.

Over 20 years at 6 cords per year paid $600.

 

[ericm979]

The cheaper units are all horizontal/vertical models. Some people love vertical mode but many including me hate it. I much prefer working with the wood at waist height than on the ground. Moving a round on its end on the ground uses mostly upper body strength. I'm tall and thin so I don't have a lot. But my back and legs are strong so I have no problem dead lifting rounds and putting them on the horizontal splitter. If they're too large (we have some big trees) I "noodle" the rounds with the saw 90% through and split them with a maul to get them into manageable chunks. Noodling along the grain is the fastest cutting orientation so it does not take much time.

A H/V splitter in vertical mode often has the road wheels partly in the way of the space you need to stand while splitting. Mine (an Oregon 34 ton) is a little worse than many since it has larger 14" diameter wheels. So far it's not been too annoying, but it would be nice to have a more open place to stand.

Mine's got a Kohler which has been fine. Starts easy and it has a fuel valve so I can run the carb dry when I am done for the day. I found an exhaust deflector for the muffler which lowers the sound at the operator station a little but it still requires hearing protection.

They pretty much all have return detent valves where you have to push the lever into the detent and it will then return the ram until it bottoms out which kicks the lever out of detent and into neutral.

 

[i7win7]

Several years ago, I too wanted a decent log splitter. The local farm type stores/lumber stores wanted $2k for a hydraulic splitter (no log lift). Splitter with log lift $8k+, order one and wait for it to be built. Kinetic splitter about $3k, what I chose, no lift but a 2 second cycle time. Built a bucking table so I don't have to lift rounds from the ground.

Processing Firewood the Professional Redneck Way

This will be a long assembly post with many photos, you may want to bookmark it and read on a rainy day. You will need a root grapple to lift logs, A miter saw to cut multiple 4x4's and 2x8's to size, plus other wood working tools most home owners all ready have. Let's start...

www.orangetractortalks.com

 

[beowulf]

Pulled the trigger. Most of the units were very similar re the bottom line of getting the job done. Affecting my choice were these considerations: the relatively small amount of splitting we will be doing; what was available to be sold in California (not all were); what was available locally right now and without shipping costs; units within the 20-30 ton range; those with a few key features I wanted (e.g., auto-return, included side shelves, larger tire size); those with the ergonomically best control locations on a full beam unit (this issue eliminated one brand); my reviews of all the engines offered with each unit; the cost; and perhaps mostly - user demonstrations and reviews in video presentations. I watched at least 25-30 videos of the different units being demonstrated and commented on, and read dozens of reviews posted by users. So, for our approximately 'cord-a-year' need, we went for the Champion 27 ton unit - and will make a modification to that based on a recommendation in one of the videos I watched. Others may make a different choice based on the same criteria, but this seems to be a good fit for us and hit the sweet spot re cost.

Negatives with the one I chose: apparently no 4 way splitter attachment that fits; debris can collect on the rail more than on others; not a honda engine.

Sincere thanks to all who opined here - I read everything carefully. And some of the comments sent me off to review the engines offered with the different units -learned a lot there - who makes what and where and performance, etc. Anyway, it arrives on Wednesday.

 

[mcmxi]

All I can add is that I have an Oregon 22 ton log splitter that I bought used for $1,200. It has a Honda engine and has split maple that I couldn't split with axes or with wedges and a sledge hammer. It's not fast, but it works well. I might not be as pleased with it if I'd bought it new for $2,500 or so. It was barely used so a good deal when I bought it in April of 2022. I didn't want one of those full-on Chinesium models that sit outside Home Depot or similar but wasn't keen on spending $3k or more on a really nice US made model.

I do plan on adding some additional protection for the engine, and a rain cover for the hydraulic oil filter and oil fill plug.

 

[ruffdog]

All I can add is that I have an Oregon 22 ton log splitter that I bought used for $1,200. It has a Honda engine and has split maple that I couldn't split with axes or with wedges and a sledge hammer. It's not fast, but it works well. I might not be as pleased with it if I'd bought it new for $2,500 or so. It was barely used so a good deal when I bought it in April of 2022. I didn't want one of those full-on Chinesium models that sit outside Home Depot or similar but wasn't keen on spending $3k or more on a really nice US made model.

I do plan on adding some additional protection for the engine, and a rain cover for the hydraulic oil filter and oil fill plug.

View attachment 861153


View attachment 861154

View attachment 861155

I see in your vertical position you use a spacer on the ground (middle picture) so the rounds lay flat to make it easier. Out in the woods I can bury the end in a low spot to do the same. Also, it looks like the Oregon is made by the same people that made Speeco splitters. Good to know if you ever need parts.

 

[Skeletor]

Don’t get too wrapped up in how
Many tons a unit is advertised as having. Most of it is b.s. if you do the math the unit usually doesn’t even come close to advertised tonnage. Cycle time is the big one. You definitely want an auto return.auto cycle is a personal choice kinda thing but that’s on higher end splitters.

I bought a ram splitter off eBay over 15 years ago and heavily modded it over the years to make it much better. Two years ago I got a Wolfe ridge pro 28c. Log lift, 4 and 6 way adjustable wedge. Adjustable wedge is a game changer. Didn’t realize how useful it would be till I had it. 9 second cycle time. The new ones are about 6 seconds cycle Time so that makes me sad I missed out on that but it’s still a great splitter.

 

[Farmer495]

Splitfire