Just another junk chainsaw

[xyz123]

@hayden you own some sweet saws.

I owned several 262's alot of 346's and only 1 385.

Best running 262 I have had stock was the 1990 with K&S cylinder and 87 carb they came with. Later ones came with different cylinders and smaller 120 carbs
Even had a 262 race saw for 4ci class way back.

You got your bases covered.

 

[aba4430]

Got a lead on some Shindaiwa's on clearance; the 492 (believe it is similar to the Echo 4910) and a 600sx (similar to an Echo 620P), both with 20" bars. The 600sx is too much saw for me, I think. Will be looking at the 492 in the next couple of days.

 

[xyz123]

I always forget about the Shin ones. Ya 492 = 4910 and the 491 was the lesser 490.

Right on the other.

Dealer here in Ohio still has the Shins. Also you can look at Home Depot and order a 4910 in stock still.

One thing I did notice. The plastic handle on the 490 4910 I can feel the vibration more then I can on the rubber coated metal handle on 501.

No clue why but wonder if plastic transfers more.

 

[aba4430]

Got a lead on some Shindaiwa's on clearance; the 492 (believe it is similar to the Echo 4910) and a 600sx (similar to an Echo 620P), both with 20" bars. The 600sx is too much saw for me, I think. Will be looking at the 492 in the next couple of days.

Picked up the Shindaiwa 600SX today. Also considered the 591 and 492 but settled on the 600SX. For testing, put in a little Shindaiwa Red Armor pre-mixed fuel at Ace and I started it up easily. Completed paperwork thereafter, brought it home, added bar/chain oil and ran it for a few mins to get it warmed up. It is very easy to start, but it is new. Now to procure some JASO FD, ISO-L-EGD rated 2 stroke oil and mix up a fresh batch of fuel with non ETOH gas. The 2 stroke Valvoline that I have been using in the Echo blower and CS-345 saw does not meet the required Echo 2 stroke oil specs.

 

[xyz123]

I was down to 1 325 3/16 file and was caught off guard. I wanted to get 325 Mad Dog files to go with the others sizes I had. But being busy and didnt want to bother Ethan for 1 box.

I ordered a box of echo branded files that said made in Germany. So guessing Pferd.

Hoping they are a coarse file like Mad dog and save edge files.

Anyone know off hand if coarse? Anyone used?

Plus was only 16 shipped for a dozen and saved driving time back forth etc.

 

[xyz123]

I had one good 325 file left and caught me off guard. Bought some echo files on a whim. Made in Germany and figure Pferd.

Save edge NLA for saws during 2020 and local didnt have mad dog in stock. I like a coarse file myself.

They are no save edge. Wont buy again but they did file the new version stihl 23RS. I just like coarse.

Never had mad dog in 325 yet. But will get those next time. Have mad dog in 5/32 11/64 13/64 7/32 and been happy with those. They remind me of save edge.

 

[xyz123]

I won this mildly ported husqvarna 359 for Veterans day drawing of chainsaws being given away by Shawn B. in Arkansas. On Facebook group.

There was like 5 ported saws being given away to vets in the FB group.

My name was never drawn but won this out of default the last saw left.

How it worked if name drawn. You won this saw but can take another saw behind A B C D. Sort of like lets make a deal game show. I was last guy not picked and I got last saw left.

Corey the porter of the 359 is one of the trusted porters in my CRG FB too. He told me this saw was built mild per owners wanting a not real high psi work saw. So only about half the squish and base was removed compared to what was normally done. Per Corey.

 

[Rockbadchild]

I won this mildly ported husqvarna 359 for Veterans day drawing of chainsaws being given away by Shawn B. in Arkansas. On Facebook group.

There was like 5 ported saws being given away to vets in the FB group.

My name was never drawn but won this out of default the last saw left.

How it worked if name drawn. You won this saw but can take another saw behind A B C D. Sort of like lets make a deal game show. I was last guy not picked and I got last saw left.

Corey the porter of the 359 is one of the trusted porters in my CRG FB too. He told me this saw was built mild per owners wanting a not real high psi work saw. So only about half the squish and base was removed compared to what was normally done. Per Corey.

View attachment 1788815

nice gift!!! I have the same one, I like it and I have no complaints towards it... I have been told some part are starting to get hard to get for it but I never had to do anything to it so far.

 

[xyz123]

nice gift!!! I have the same one, I like it and I have no complaints towards it... I have been told some part are starting to get hard to get for it but I never had to do anything to it so far.

I've owned ported 357xp and couple jred 2159 in past.

So know all about these.

 

[Rockbadchild]

I've owned ported 357xp and couple jred 2159 in past.

So know all about these.

I have no doubt

 

[xyz123]

Their carbs can have issues. But Scott Kunz in WI figured out the issue and I do it to the ones I get.
You can tell which got the fix and which carb was done at factory.

Also fixing tank vent on one of them

 

[xyz123]

20" K041 3/8 050 bar set up for the 359 when it arrives. So can run on K095 and K041 saws.

White GB bar K041 on left and grey the K095 bar. White GB on right is K095 done on one side to run on K041 too.

 

[xyz123]

I just bought this NE one to set back for this NE 346 since it is no longer a e-tech version.
Never know when someone else might want everything.

A morning laugh I made for a friend that buys most of my 346's from me.

 

[xyz123]

Echo 501

 

[xyz123]

The ported 359 arrived last night.

 

[xyz123]

Quick touch and some fine tuning. 20" 3/8

Next will be the 24" 3/8 ripping to see.

 

[xyz123]

Dustin was kind enough to send me a extra homemade spike.

Kickstand spike that will fit the 346 etc. Plus 359 etc spike to compare to stop that weeble wobble I must fall over crap on it's side while set down idling.

Stock 346 stock 359 spike and the homemade one. It will be black when put on and weighed too.

 

[xyz123]

Those spikes are going to be done for others by a guy in my chainsaw group.

Template is actually being sent to a guy in Oregon soon to be copied. Then a bunch made up so folks can buy the spike.

In thread on them in chainsaw repair group. How guy in Oregon going to make a run once has template. = I use a waterjet place to cut out parts like this. If there was an order for at least 10. I can have them made fairly easy. Just let me know.
Working to have him do a thread to see how many orders to get idea and pricing. = There is a guy in Oregon that said he would want 2-3 of these if you do up a run. So might want to get a heads up on how many and pricing for folks that may want them.

I would say will be bare spike and you add the chain catcher kickstand.

 

[xyz123]

That 1/4” mini micro does just what I wanted for clean fruit tree pruning cuts.
V-modest 2511 clone of the echo.

Cutting some dead out from a past storm.

 

[xyz123]

Local that bought my OE 346 1999 running the just redone 09 NE 346. He wants.

Told him lets just put the 44.3 new OEM set on his to save him some $. Labor on me.