QT1 Cab on a 2013 MF 1533.

[Casaid1]

Just because it's always fun to critique someone's welds here's mine. Whatcha think will it come flying apart?

 

[Casaid1]

Little by little closing everything up. Got the back panel welded in. Also filled in alot of cracks with spray foam. Also got weather stripping around a couple windows. More to seal up tomorrow.

 

[Casaid1]

Little by little it's closing up. Got the side gaps all welded in. Still need to enclose the bottom....

 

[Casaid1]

Got to drive it in high speed today. It's loud. It's 70 degrees outside and about 120 inside the cab. With the windows open and while moving it's probably 80-90 degrees. It's definitely gonna be a 40 degrees and lower cab unless I'm using it for 10 minutes. Or I get a cab AC.

 

[Sportsman762]

Got to drive it in high speed today. It's loud. It's 70 degrees outside and about 120 inside the cab. With the windows open and while moving it's probably 80-90 degrees. It's definitely gonna be a 40 degrees and lower cab unless I'm using it for 10 minutes. Or I get a cab AC.

Cabbed tractors without AC are terrible. My Massey 20C has a cab and no AC. I generally run with the doors off in the summer and the cab fan blowing on me. I would recommend a cab fan, it helps defrost/defog the windows in the winter, and keeps you cooler in the summer.

 

[Casaid1]

Cabbed tractors without AC are terrible. My Massey 20C has a cab and no AC. I generally run with the doors off in the summer and the cab fan blowing on me. I would recommend a cab fan, it helps defrost/defog the windows in the winter, and keeps you cooler in the summer.

That's actually a great Idea. All the windows and doors on this thing come off quickly. I could just remove all of them in the summer. Thanks.

 

[Casaid1]

My driver side door was very warped. I tried a few times to bend it back but the top front of it had a decent gap. So I made my own "draw latch". It was actually raining today and I didn't feel any water on me or see any drips.

FOR $50 INTO THIS CAB PROJECT I CALL IT A WIN.

 

[Casaid1]

I still have to add backup cameras and ext/interior lights, but as of now this is how it sits for a bit.

 

[Casaid1]

Cab interior pic

 

[Jrasband]

cool project, thanks for sharing!