Help - Rolled my JD4710.

[TMGT]

As already said, top of rops is a good pulling point. Also make sure you set the parking break before righting it!

Sent from my SM-S921U using TractorByNet mobile app

 

[AuCivil]

A JD 4710 comes in at North of 2 tons, with loader.

Pulling it upright should take less than it would take to lift it. (angles, forces, physics, and math)

Anything you can do to "lift" while turning will be a good thing. Cut a ten foot log and notch the end for a cable ??
Multiple fixing points to the tractor will be a good thing.

Trees on the up hill side for anchors? Or will you roll it down hill? That seems like a major decision.

I've got trees to anchor it. Don't plan on rolling down hill. Will have to tow it uphill once it is upright.

 

[CalG]

I've got trees to anchor it. Don't plan on rolling down hill. Will have to tow it uphill once it is upright.

It is Important to have a plan!

From my take on the pics, The tractor needs to roll UPHILL about 130 degrees. That is likely the full weight of the tractor for about 6 or 7 feet of pull.

A few come alongs will do the job, but the pull distance is going to be a challange.

Power pulls/ cable pull equipment might be the best option for a DIY (re-sell the investment afterwards)

Vestil CP-15 Steel Long Reach Cable Puller

The Vestil CP-15 Steel Long Reach Cable Puller is the perfect tool for those jobs that require an extra boost. Capable of a maximum pull distance up to sixty feet, it's ideal in horizontal applications and can save time by avoiding having to rehook when using manual hoists. However, it should be...

materialhandling.com

https://prowinch.com/shop/7040-lbs-lever-cable-wire-rope-puller-hoist-65-ft-steel-body?gad_source=1&gad_campaignid=21124227803&gclid=EAIaIQobChMIpoSJhabzkAMVLTgIBR0wMSGvEAQYBSABEgINePD_BwE

 

[ruffdog]

This video will give you an idea what needs to be done after a rollover.

 

[CalG]

As already said, top of rops is a good pulling point. Also make sure you set the parking break before righting it!

Sent from my SM-S921U using TractorByNet mobile app

setting the parking BRAKE is a great idea!

 

[Shawn T. W.]

I'd be concerned with just pulling on it that it might just slide up the hill on its side ... If there is a way to chain down the lower rear tire at what will be the bottom when it's back up, so it stays put ...

Also jacking the lower side up first may put some weight on the bottom of the what's now the bottom tire before pulling on it.

Looks like the seat took quite a hit!

 

[dougtrr2]

From the pictures, the slope doesn't look that steep. If you don't mind could you dissect what happened. Wheel in hole, loader too high, more slope that it looks like???? I just try to learn as much as I can from others.

Doug in SW IA

 

[Engineer42]

I've got trees to anchor it. Don't plan on rolling down hill. Will have to tow it uphill once it is upright.

You probably didn't plan on putting it on its side either, but things happen. You need to get it on its tires as soon as possible. But safely.

Either hire it out or do it with help. But prepare for unexpected movement.