Recent content by 4runner

I have a 2003 4110. I guy at work is selling a 54 in midmount mower from a 4100. Are they compatible? Anything to look out for? Thanks, Bob

It's not 100% but now usable. I bought some PB blaster and give it a good soaking and working the joystick. I tried to remove that shaft (part 22 in the diagram below). I'm convinced the shaft is seized/locked on to the inboard bell crank so I could not remove it. Fortunately,the PB blaster...

Well I'm 99% sure it's a linkage issue rather than the valve assembly. See the three pics. The first is the turnbuckle that ties the curl function to the lower valve cylinder on the valve assembly. With this attached everything feels tight during side to side curl action. I removed the...

My tractor's loader joystick seems to be binding during the curl action... It seems ok for raising/lowering. It worked ok earlier this year, but I didn't use the tractor for a few months and now it seems messed up. Any ideas? Thanks much.

A few weeks ago, I swept out the garage before moving my John Deere 4110 into it's winter location. So at that time, the garage floor was clean. I used the tractor several times over the last weeks and it has been the only machine parked in this place. Yesterday, I noticed this chain on the...

My 4110's 3-pt hitch lever is acting up. It had been binding, but with some effort, I could always get it to move the full range. Today, I looked at the level and it was a bit twisted. I straightened it, (aka bent it back) but now it moves to the highest position ok but will not go lower than...

Hi, I am looking for some travel advice for Nashville area. My wife and I are thinking of going there for a long weekend just to explore the city. We were thinking of staying in the city, but don't know what area would be nice... downtown, or music row, or other. Any opinions? Thanks Bob

My daughter and her husband were painting one of the spare rooms in their late 1950s era house and came across a small electric/warning box attached to one of the walls near the ceiling. It was wired with light duty wires into the wall. A picture is below. Does anyone know what it was for? A...

I have a general 4WD question. It is related to towing so I figured this is a good place to ask. I currently have a 4Runner with a center differential that allows me to operate in full time 4WD, or part time 4WD or 2WD. I can also lock the center diff if need be. The multi-mode system has...

I have a 2002 Toyota 4Runner with about 160K miles. It has treated me well- no major issues except for wear items. I have generally had it serviced by Toyota and used OEM parts. Currently I do have one exhaust issue (may require new catalytic converter). I am debating whether I should stick...

The question... JD 4110. I don't have the service manual or a schematic for the tractor. My question is, does depressing the switch activate a relay or other circuit that may put a low current drain on the battery even when the tractor is "off"? The back story... First, I know I am due for a...

I tried to post some photos today. I did a search on the forum and saw posts that many use Photobucket. I signed up, and Photobucket seems to have some bogus spyware antivirus link it keeps trying to run this antivirus program. I couldn't dismiss the window, and I'm about to give up on...

I was reading the owner's manual for my 4110 and it said that when installing cast iron wheel weights that they should be installed with the wheels in the "narrow" position for improved stability. This seems counter intuitive- what am I missing?

Is there a listing or spec item for a tractor's static center of gravity? I am looking at a JD 4110 and I took a second look at it yesterday. The 4110 was parked next to a 2320, and the 2320 looked much taller than the 4110. Is there anyway to compare the CG other than the eyeball method?

I have my eye on a used CUT at a dealer. It was used for mowing, and the dealer swapped out the mower and put a loader on it. Tires are not loaded. Here's my question. Should I expect that a used tractor with a fel should come with a ballast box as part of the package (no additional charge)...