Recent content by al20hp

  1. A

    Help getting lower draft link pin out

    Just had the same thing happen to my JD 4700. Same deal, pin wouldn't come out. It was getting hung up on the backhoe mount. I took a grinder to the old pin base and got it out in 10 minutes. I was careful not to grind too deep. Now time to buy a $120 pin!!!!
  2. A

    Bent bucket cyl on model 48 backhoe

    Are your measurements from end to end of the cross tubes. Or from the center of one cross tube pin, to the center of the other cross tube pin? Thanks again Al Hopefully, I will have this thing running again soon!
  3. A

    Bent bucket cyl on model 48 backhoe

    👍
  4. A

    Bent bucket cyl on model 48 backhoe

    I purchased a 1.25 “ x 8” piece of stock steel and some bushings. I’m not sure if I’m going to use the original bolt hole to hold the pin. When the new cylinder is in place I can determine if I need any shims
  5. A

    Bent bucket cyl on model 48 backhoe

  6. A

    Bent bucket cyl on model 48 backhoe

    Thanks for the measurements. My new cylinder is scheduled to arrive today. I removed the old cylinder & pins the other day with no difficulties. The pins came out with minimal effort. Hopefully I can get it to the welder tomorrow. Thanks Al
  7. A

    Bent bucket cyl on model 48 backhoe

    My JD 4700 with 48 backhoe is all factory
  8. A

    Bent bucket cyl on model 48 backhoe

    This is my first time repairing a hydraulic cylinder (besides replacing hoses). Two questions 1)What did you use to cut the rod? Metal chop saw ? 2) Also, guessing I'm going to to be cutting somewhere between 6-8 inches of the replacement rod off. Prior to cutting it, I'm figuring...
  9. A

    Bent bucket cyl on model 48 backhoe

    I just had the same thing happen to my bucket. Bent the dam rod! I was reading your post .I think I am interested in going in the same direction. One quick question. Instead of putting bushings on the one end, why didn’t you replace that end of the new cylinder with the end from the original...
  10. A

    Pole Chainsaws

    I just ordered a RedMax pole saw. They have excellent reviews. I will let everyone know how it performs when I get it in the next few days. Al
  11. A

    Jut bought a new/used Aluminum H&H Speed loader tilt trailer

    👍
  12. A

    Jut bought a new/used Aluminum H&H Speed loader tilt trailer

    I purchased a used (new to me) H&H electric speed loader tilt trailer. 20ft, 10k , 10k Winch. brand new radial trailer tires. It seems like a solid unit, I plan on using it for my John Deere 4700 loader/backhoe. Here are a few pics
  13. A

    Trailer needed for JD 4700 question

    I have a John Deere 4700, 460 loader, 48 backhoe. Altogether, it weighs just over 6000 lbs according to my estimates I am looking for a 10k lb trailer to transport my JD a tractor a short distance from my house to a summer property. I am interested in a light weight aluminum trailer...
  14. A

    John Deere 4700 won't go into gear

    M808491. Pinion
  15. A

    John Deere 4700 won't go into gear

    Update I was at the tractor repair shop and they found the problem.
See more

Footer Links 1

Top