Bought this used and when I looked at the blades after using it for 100 hours I noticed that 2 blades had a couple inch notch in the middle at one end of the blade. The third blade was all steel like I would expect. Is this right?
If I need blades I think the part number is Kubota K5647-97540...
When I bought my L3200 I found this forum to be invaluable in taking care of my new orange baby. I just bought a used Kubota RCK60P-28Z zero turn mower. I think I got a good deal...diesel engine only 680 hours - new fluids, filters and blades. I wonder if anyone can direct me to a similar Kubota...
So I normally attach a drag harrow to my RCR1860 rotary cutter when cutting the pasture to help break up the horse manure piles. Anyway, yesterday without thinking I backed up over the drag harrow with the cutter turning. Of course, the harrow was broken into about 10 pieces but my bigger...
I'm burying a small black poly irrigation water line about 12" deep. I had a fellow with a skid steer do some other work and he just attached what looked like an 18" or so spike to his loader and made the narrow trench I needed. I now find I have to extend that line. Do they make something...
So occasionally my L3200 would lose power. I had posted on this issue a while ago and have taken all the advice I've gotten from here and put it to good use. By that I mean, I've:
Changed out the fuel filter
blown out all the fuel lines
dumped my diesel in case it was bad
Added an algaecide in...
Given I am trying to maximize the weight I can lift with my new forks (or a bucket, for that matter), I know I need to counterbalance with weight on the 3PH. I have loaded rear tires , but no weights to put on other than a bushhog or other 3P implement. I was thinking about filling up my 60 gal...
Does anyone know what the correct washers are for an L3200HST 4WD oil plug? The part # is 6C090-58960 but I would like to buy them local (my dealer is an hour away). These are the flat copper washers. I assume everything on a Kubota is metric so my guess is that they are an M12 that you could...
This looks like a great idea...I'm tired of wrestling with my 3-point attachments so I'm going to order a set today. My question is what does the $25 stabilizer bar do?
Any comments on this system would be appreciated.
On my L3200 HST I start the engine with the clutch engaged as normal and the PTO switch off (not spinning). When I let the clutch out the PTO engages and starts spinning even though I do not have it set to do that. There are two contacts below the PTO switch that are making contact/not making...
I was running my RCR1860 today and when I went to push the clutch in and disengage the PTO it did not stop (although it seemed to slow down). This happened multiple times. In fact, when I stood up the seat interlock did not engage and the PTO kept running.
It looks like there is some kind of...
I'm new to tractoring but I think I picked a good one last year (with a lot of people's guidance) in a new Kubota L3200 HST 4WD for my 20 acre horse farm that is supposed to be our retirement abode. ;)
Early this year it came time for the first 50 hour maintenance. I've done routine maintenance...
I'm new to tractoring but I think I picked a good one last year (with a lot of people's guidance) in a new kubota L3200 HST 4WD for my 20 acre horse farm that is supposed to be our retirement abode. ;)
Early this year it came time for the first 50 hour maintenance. I've done routine maintenance...
I'm new to tractoring but I think I picked a good one last year (with a lot of people's guidance) in a new Kubota L3200 HST 4WD for my 20 acre horse farm that is supposed to be our retirement abode. ;)
Early this year it came time for the first 50 hour maintenance. I've done routine maintenance...
I'm new to tractoring but I think I picked a good one last year (with a lot of people's guidance) in a new Kubota L3200 HST 4WD for my 20 acre horse farm that is supposed to be our retirement abode. ;)
Early this year it came time for the first 50 hour maintenance. I've done routine maintenance...
I'm new to tractoring but I think I picked a good one last year (with a lot of people's guidance) in a new Kubota L3200 HST 4WD for my 20 acre horse farm that is supposed to be our retirement abode. ;)
Early this year it came time for the first 50 hour maintenance. I've done routine...