BCLoco's latest activity

1735M, same power loss issue, struggled for a long time with trying different things to figure it out. I tried replacing almost...

One last thing to add: nearly every part has an alphanumeric part number stamped on it that follows the same numbering scheme. Two...

This was a piece that was sitting in the fields for who knows how long. I did manage to get it going yesterday. Needs a needle bearing...

I hope someone here recognizes this mower, because I've internet searched for an hour now and I'm coming up blank. If anyone knows, that...

Here is the thread you were referring to: Massey Ferguson 1740M Hydro: LOSS OF POWER when hot!

I did a lap around the field with the fuel cap removed to try the simple items first. I'll check if there is another fuel filter, and...

I sure hope "my dealer doesn't return my phone calls" is some kind of figure of speech meaning you do not get along well. Other wise...

Loosen your fuel cap 1-1/2 or 2 turns and put a piece of tape across to keep it there. Run it hard like that and let us know if there's...

I'm currently researching the injectors and possible 3rd party (aftermarket) distributors. I'm not saying the injectors are the issue...

I don't recall has any one relocated or added a fan to cool the ECU.

I should report to the public, I have been in extensive contact (messaging) with a few members of this and other tractor forums. This...

Diesel trucks with DEF/DPF that sit long periods or used for short trips without pulling a trailer, tend to get soot build-up in the...

I'm a long ways away from making a similar decision. I need a bigger truck, but it's not something that I'll use every day, and it...

Don’t buy the Ram, not because it’s a bad truck but because it won’t have the payload to pull your truck. Will you be happy with the...

I think that said 300, not 300k. That fits with "sitting on the lot". I'd be wary of that because 2 years is a long time to not move...