Blondie70's latest activity

I think there are 2 coils in the fuel stop solenoid. One is energized while starting, and the other is energized while running). Could...

Remove glo plugs to make sure they work .

Can you get a syphon going and just suck the stuff out of the bottom of the tank?

The problem is not so much with the tractors I have. I'm getting old and sore. My 424 has such a miserable clutch design I rarely use...

If the old one has been doing the job, maybe it just needs a bit of TLC? Or even a rebuild? Another thing I just remembered, just last...

While I've never owned or operated a tractor with only a DPF ... I've been driving trucks that had the DPF since they came out ... I run...

A particulate filter doesn't worry me in the least - I just ordered a 35hp tractor that will have a filter. No big deal - just let it...

L2502 has power steering. It should be easy to turn at any rpm. Something is not right with yours.

Also, you shouldn't ask people who have had no problems. Ask the people who had to replace their emissions systems. Find out what it...

My advice is to ask people who don't like them. Find out why.

I agree trying to straighten in place puts the housing at risk. I would take the axle out and straighten it with a press. The diagram...

I agree. Just replace it. I would be afraid of damaging the housing trying to straighten it. And it would likely just bend again if not...

Well, I see that ordering from Messicks that I can get a new axle for a little over $200. I guess that's somewhat encouraging.

The trick to that is to wait until the glow plugs cool off. For instance, if your ignition has a separate position, to the left, for...

I'd sure check that hose, or better yet just replace it with one having the internal spring. The other place that can cause overheating...