Recent content by blucoondawg

If it blows up I'll tell him to get a clutch instead but the one he has is substantially heavier than the 1 1/8 to 1 3/8 converter he was using before. I expect he will destroy something anyways if he ever gets it working. He can't get it through his head that you can't rototill at 3.7 mph. It's...

An orc does nothing for a tiller, the ground stops the tines when you remove power, he doesn't have a rotary cutter, that's what would require an orc. The shaft is the same length as the old shaft there is not a different length shaft available that I'm aware of

Yes, it would extend the shaft, he has that part remedied already, he put an extender on it, it's not an orc all it does is make the shaft longer but has no clutch function. The problem now is with that added length to the pto, the implement driveshaft has to be cut so short in order to fit that...

Too fast for a tiller I mean, my phone's going crazy and I can't find the edit function on here

I already said the tractor is too far for a tiller.i time him that before he bought the tiller but the guy he bought it from time him it would be fine and he valued his opinion over mine who had run tractors forever, so now he has what he has. What would be the point of the overrun clutch at...

Hopefully there's some 8n experts on here too help me out My buddy picked up an 8n last summer, it had the old pto shaft which was the smaller size, so he got an adapter for it and ran a tiller on it and kept blowing up the adapter. If you ask me the tractor is more meant for tilling, it's way...

Hopefully there's some 8n experts on here too help me out My buddy picked up an 8n last summer, it had the old pto shaft which was the smaller size, so he got an adapter for it and ran a tiller on it and kept blowing up the adapter. If you ask me the tractor is more meant for tilling, it's way...

Thanks, I was at the tire shop today and asked about loading the tires I thought the price was pretty reasonable I think I'll be doing that this summer some time

Ok, I guess I'm asking what guys who have them use that works well. I don't need an explanation of what the tractor came with it how the magneto system works I'm pretty familiar with that, I just know there the battery that used to be in this tractor for like it was meant to be there, then...

Anyone with an allis c 12v tell me what size battery they run? I'm gonna start drawing my old girl out of the weeds and fixing on it the battery that's in it isn't the right size it doesn't fit in the battery box worth a crap. It's too tall and narrow. Last time I was at the store I couldn't...

Anyone pulling a 8ft 3 point disc with a dk50se? I found a old Ford disc in nice shape but don't know if I can handle it, I was gonna look for a 6 foot disc but this one is in nice shape if I can handle it

In my search for a 3 point disc I have found a older Ford 3 point Disc, they say it's 8ft. Looks in good shape, red frame, notched disc front, smooth rear. From searches I've done online it looks like it may be a 201 or J they don't have the model on the ad. They are going to check the size of...

Thanks for the information guys, it seems the new regulator has fixed the issue. Now we're waiting on a new adjustable side link and we'll be in business

I had him remove wires from the battery terminal last night and the drain stopped, there were 2 wires on that screw of the regulator, one is the wire which is supposed to be there, the other is power for the headlights they are grabbing from that screw on the vr. The draw is coming from the...

Correct running the tractor doesn't give enough charge, I can charge it with a 10 amp better charger and it will turn over like a million bucks, run it for 20 minutes and go to start again and I can probably get one more start out of it but it's very slow cranking. After that it will need the...