Recent content by bol4fun

My son. Changed it out and it started right up but today, I believe I smelled something and checked to see if the starter was hot so licked my fingers and it was very hot. After reading your post, I realized that just before the starter fried, my son was watching the house while we were on...

I haven't used my brush cutter in several years since I bent the blades and bought new ones. When I bolt them back on, do you tighten bolts all the way on the blades or leave them loose a little.

What did Terry tell you to do?

My 2017 425 doesn't float anything like it used to🤣. I try to push it quickly forward to engage float and everything in between but it is really hit or miss....maybe 20 to 25 percent of the time, it works. It's very frustrating trying to level things out. Any tricks to get it to work better?

Thanks for the comments. I called Terry and my 2017 model has a bolt under the hydraulic pump that you turn 1 to 1.5 turns to put it in neutral. You can't see it. I luckily have a volvo mini excavator because the bucket was full of dirt on the ground so I just lifted the front end with a...

Lol....I'm 74 and once pulled my hair out trying to get it to start with the pto switch on... woops. I use my 425 daily and was all bummed out when it was down. Yesterday, my son pulled the engine with my help and swapped out the starter and put it back together in 90 minutes. Great fathers...

I smelled burning plastic and jumped off my 425 today and saw flames above the Robin starter so through some dirt on it and put out the flames. The starter was very very hot and after everything cooled, took a picture to see the braided wire wrap was melted off and tried starting it. It doesn't...

I played around with gas supply and blew back into the tank and dislodged some crud from the outlet.....didn't help yet the next day it ran perfect. A week later it started again and removed the gas tank, cleaned out some more crud at the outlet and changed out the tubing but nothing. I...

I ran out of gas last week, filled it up and it immediately started to surge. I opened the hood and noticed I forgot to put the cap on so that I discovered the problem but that didn't help. I called young son who told me to change the fuel filter. I cussed through that job and finally removed...

I replaced the hydraulic seals in the bucket cylinder about a year ago and noticed it was making a creaking noise and leaking the other day. I remember the cylinder arm coming to rest on something a few weeks ago and am concerned it may have slightly bent it???? I have another rebuild kit so...

Finally got around to working on the bolt. I bought my PT new in 2017 so the newer brush hogs are different. You don't have to take anything off the top of the unit. My son just took his impact gun and removed 5 bolts from the underside and it dropped down and we backed the bolt out with a...

I hate using it because I just don't have the strength to disengage it but loaded it on trailer last week to go help a friend so used it on the trailer. Anyhow, now it won't disengage all the way and keeps clicking. The lever won't stay all the way down and quicly creeps back up about half...

Thanks bunches😀

First timer for changing a broken bolt. I luckily found the spacer, washer, and blade. I have read everything but not comprehending a lot. Where to start? ....big nut with cotter pin?.... 4 motor bolts? I am assuming that the drum on the under side has to come off. Any advice would be...

We've had somewhat of a drought in Central Iowa this summer and my 1/3 acre front yard of my new house has been like a dust bowl. Long story short, haven't been cleaning the air cleaner enough and at 55 hours in on next oil and hydrualic fluid filter change (was going to change today), it made...