Just an update. I still have the tractor. Around 900 hours now. I had to replace bearings in both front wheels. Caused by snap ring breaking and wheel and axle stub coming out. TYM upgraded the snap ring to a better design. The steering shaft stop leaking on its on. I never did replace the...
Anyone ever had their TYM tractor go into derate mode? :confused:If is there a way to reset the cpu? Removing power for 24 hours did not work. I am unable to find anyone with a yanmar smart assist unit. Thanks
Ran it to a little problem the other day while moving dirt. Loader would not go into float and raising the bucket with a full load was a little slower. The problem was in the end cap on the loader control valve. Inside the cap is a ring nut that holds the three balls for the float pos. The nut...
To the owners of Cabela's tractors that still have warranty. Looks like we are left out on our own to get repairs. I have two problems that need repairing. I thought I had two more years of warranty. When I bought the tractor a year ago they said they would continue to repair them even though...
Had a husky 450 for a few years. Was bad on bars and sprockets because of the non adjustable oil pump. The pump on this model does not pump at idle when the chain is not moving like on bigger saws. It was only using 1/2 of oil per tank of fuel. I took the pump out and drilled the hole...
Anyone know the location of the pressure relief valves? Loader needs a little more pressure. Probably set a little low from factory.I assume there is one on the loader spool? Can not find anything in the owners manual.