Recent content by cabinhollow

You just can't go to the local big box farm store and get parts for a 35 year old Uni, so I made the ones I needed this week. The new brake comes in handy.

Here how I have my saw setup for angle cuts. It is on a swivel and I can also change the height.

The gates are 7' wide each. Total open 14'. This picture shows how close we got them lined up.

The panels are bolt together. Some parts are 6' tall, 4' tall and 3' tall. With panels length from 4' long up to 12' long. All powder coated. The post on the 6' tall, panels and gates are 1/4" x 4" x 4" and have a 6" H beam cross welded on to the bottom. For the 3' and 4' tall panels, the post...

90' up and 30' more to go.

Just pull the pin to remove it. Adds 6" to 7" length to the drawbar, which lets you make turns better. I have one with a 2" ball and one with a 2 5/16" ball.

Here a picture of my TYM 754 ready to cut hay. I have had it for two years and have just under 400 hours on it. Just a few small problems that my dealer took care of. The E PTO is very useful. I only use the 540 PTO when I am mowing hay or grinding feed.

I seen one been used at a show last year, but can not find any more info on them. Anyone know were to find the info?

Texasmark, It floats good front to back. It's side to side that I do not have it level yet. With this one you have to adjust the lift arms and then use a chain, that runs from one arm to the top link on the tractor to level it from side to side. The two smaller ones I had, work just like yours...

With a 2.1m SaMasz drum mower on a 74 hp tractor, I will cut 5-6 acres per hour. With a 40 hp tractor a 1.85m drum mower will cut close to 4 acres per hour. And I also have over 150 sheep. A 2.1m drum mower will out cut a 3m disc mower.

With a 210 drum mower, cutting at 10+ mph. Just the right size tractor for that size mower.

Just about got it leveled out today. Here what it looks like on my TYM 754. Mowed at 10+ mph today.

KY Fastline has a two page add for RK (TYM) tractors this edition. Their = to a Kubota BX1880 is $3500 less and has a Yanmar engine. So, you can get a red tractor, with a green engine for $1000's less. Don't tell the JD people that.

Cut this out this week.

Got it this week. Just got to unbox it and put it together.