Recent content by Chaostamer

I have a new NH T4.75 and looking at a Bush Hog X2512R for a mower (12'). I cannot find specs on minimum tractor HP for this unit. Anyone have that information?

Looking at these two tractors. About 10k more for the T4.65, all other options very similar. Is it worth it?

We have 75 acres that we would like to freshen up pastures by seeding in grass seed. We also are revamping by spraying out and planting. I am wondering if there is a no-till drill that we could use with our 60 hp kubota tractor. Thoughts?

Anyone have a schematic on the linkages for the 3 pt on a 3215 HST? I can move the position handle to raise or lower the 3 pt, but the arm won't lift. It seems like a part is missing because a linkage type pen on the end of a rod is shiny (as if something rubbed on it as it moved) but without...

I just bought a used sprayer that has four Teejet Directovalve control valves on it. I need to add a switched power source to it. I am thinking of hooking it on my Mahindra 3215HS and using a 6-way round plug for the electrical connection. The switches (4 min - could add 2 other switches for...

Just bought a drill and am looking for more info on it. The metal plaque on it shows as a type "E00BB" and serial of "066080M". Does anyone know more about the drill? Date? Parts availability? Nuances of maintenance and or operation? Manual? I've included pictures.

I was dragging the road one day and on the way back up the hill I heard an ungodly clanking up front and center to tractor (3215HST). Shortly after stopping and then starting to see where or what and it disappeared. So did the front of my 4x4. Any ideas on what it could be? Approaches to try...

Anyone know how to take the front driveshaft off and check gears for 4wd on Mahindra 3215HST?

I have an older HD8 Shaver post driver/pounder. When I mounted it on my 3215 Mahindra, it was only 1 inch off the ground. I thought that might not work so well going up and down hills. Therefore, I put it on the FEL. It works great with one exception. When the driving unit comes down, it rocks...

Okay - I apologize to those purists and those who have forgotten more than I will ever be able to know about tractors and hydraulics. But I am a novice, so much so that I have come up with little information to help me after 3 hours of searching. In other words, I don't even know enough to...

I have a 3215 hst. I had an issue with my transmission dipstick where it was chewed up. I thought it was because my young boys bent it around some. I got a new one and when installed it immediately started getting knocked. I now use my old one as a cap and bring out the new one whenever I want...

I have a 3215 HST and am trying to install a post pounder on it. I need to get a 3/4 to 1' return hose tied back into the unit. I know tying in below the fluid level is best, but I cannot find a place to drill and tap a hole and there is no original port large enough. Location suggestions are...

I have a Mahindra 3215 and plan to put a Shaver #8 post driver/pounder on it. In doing so, I need to get a 3/4 to 1" hose to drain back to the tranny. The problem is I don't know where. I have one idea - take it back to the transmission oil fill hole. The problem is I don't know what the thread...

Pictures at last (unfortunately the wait didn't help the quality.

We moved to our property in 2007; by mid Jan 2008 we found out the value of a PTO run snowblower (paid for itself in a matter of days). The problem was our Mahindra is open station and going backwards was not fun. In 2014 we bought a tractor that can lift the larger square bales to help insure...